HP INTEGRITY RX3600 User Manual Page 197

  • Download
  • Add to my manuals
  • Print
  • Page
    / 356
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 196
Table 6-2 PCI/PCI-X/PCIe I/O Paths
EFI Device PathHP-UX Device
Path
Location as
viewed from
rear of chassis
Function
Associated with
Path
Slot
Acpi(HWP0002,PNP0A03,400)/Pci(1|*)0/4/1/*Left-most slot (
nearest to
power supply)
SAS core I/O
card
1
Acpi(HWP0002,PNP0A03,400)/Pci(2|*)0/4/2/*2nd from leftDual port
Gigabit LAN
(core I/O LAN)
1
2
Acpi(HPQ0002,PNP0A08,600)/Pci(0|0)/Pci(0|0)/Pci(1|0)/Pci(0|*)0/6/0/0/0/0/1/0/0/*3rd from leftI/O PCIe x8
(switched with
slot 4)
Optional SAS
core I/O card
3
Acpi(HPQ0002,PNP0A08,600)/Pci(0|0)/Pci(0|0)/Pci(0|0)/Pci(0|*)0/6/0/0/0/0/0/0/0/*4th from leftI/O PCIe x8
(switched with
slot 3)
Optional SAS
core I/O card
4
Acpi(HPQ0002,PNP0A08,700)/Pci(0|0)/Pci(0|*)0/7/0/0/0/*5th from leftI/O PCIe x85
Acpi(HPQ0002,PNP0A08,300)/Pci(0|0)/Pci(0|*)0/3/0/0/0/*6th from leftI/O PCIe x86
Acpi(HWP0002,PNP0A03,200)/Pci(1|*)0/2/1/*7th from leftI/O 133 MHz
64-bit PCI-X card
7
Acpi(HWP0002,PNP0A03,500)/Pci(1|*)0/5/1/*8th from leftI/O 133 MHz
64-bit PCI-X card
8
Acpi(HWP0002,PNP0A03,100)/Pci(1|*)0/1/1/*9th from leftI/O with 66 MHz
64-bit PCI-X card
(shared with slot
10)
9
Acpi(HWP0002,PNP0A03,100)/Pci(2|*)0/1/2/*10th from left (
nearest to core
I/O board)
I/O with 66 MHz
64-bit PCI-X card
(shared with slot
9)
10
Acpi(HWP0002,PNP0A03,0)/Pci(1|*)0/0/1/*Right most
special slot
Core I/O iLO 2
MP
Core
I/O
board
Acpi(HWP0002,PNP0A03,0)/Pci(2|*)0/0/2/*Right most
special slot
Core I/O USBCore
I/O
board
Acpi(HWP0002,PNP0A03,0)/Pci(4|*)0/0/4/*Right most
special slot
Core I/O VGA
(optional)
Core
I/O
board
1 The Core I/O LAN may be in slot 10 depending upon the configuration.
Shared Slots
Shared slots have card compatibility restrictions. If one of the shared slots is occupied, the card
added to the second slot is limited by the configuration of the occupied slot. If the new card has
a slower capability than the current bus configuration, it fails. If the new card has a faster capability
than the current bus configuration, it only runs at the slower bus mode and frequency of the
current bus configuration.
The following are common configuration scenarios for cards that use shared slots. These examples
also apply to slots nine and ten because they are shared (both use a common bus).
Removing and Replacing a Hot-Pluggable PCI/PCI-X/PCIe Card 197
Page view 196
1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 355 356

Comments to this Manuals

No comments