Hp 9250c Digital-Sender User Manual download pdf (Page 44)

Table 3-8 LDAP Authentication

Callout Area on the screen Information or capability that the area provides

1 HP EWS tabs and

menus

For more information, see Navigating through the HP Embedded Web Server.

2 LDAP Server Bind

Method

The LDAP Server Bind Method setting determines how the device will access the

LDAP server. Contact your LDAP server administrator to determine which method

will work best for you.

●

Simple - The selected LDAP server does not support encryption. Note that the

password, if any, will be sent unencrypted across the network.

●

Simple over SSL - The selected LDAP server supports encryption using the

Secure Sockets Layer (SSL) protocol. All data, including the username and

password, will be encrypted. The LDAP server must be set up to support SSL,

including configuring a certificate that establishes its identity.

Also, the device network interface must be configured with a Certificate Authority

(CA) certificate to validate the LDAP server. The CA certificate is configured on

the Networking tab of the Web interface. In some LDAP server configurations,

a client certificate is also required and is configured on the same Networking

tab.

3 LDAP Server The LDAP Server setting is the host name or IP address of the LDAP server to be

used to authenticate device users. When using SSL, the name or address typed here

must match the name in the certificate that the server sends.

Multiple servers can be included in this field by separating their addresses with a

vertical bar ('|', ASCII 0x7c) character. This feature can be used, for example, to

specify primary and backup servers. The network interface only supports a single

Certificate Authority (CA) certificate, so all the LDAP servers in the list must use the

same CA.

4 Port The Port setting refers to the TCP/IP port number on which the server is processing

LDAP requests. Typically, this is port 389 for Simple binds or 636 for Simple over SSL

binds.

5 Use Device User's

Credentials

The Use Device User's Credentials method uses the Bind Prefix, the string that the

user enters at the control panel, and the Bind and Search Root to construct the User

DN. The constructed User DN is used to authenticate the user.

The Bind Prefix setting is the LDAP attribute used to construct the user's

Distinguished Name (DN) for authentication. This prefix is combined with the

username typed at the control panel to form the Relative Distinguished Name (RDN).

Commonly used prefixes are "CN" (for common name) or "UID" (for user identity).

6Use LDAP

Administrator's

Credentials

Use Administrator’s Credentials

attempts to search for the user’s

DN instead of trying to construct

it.

The Administrator DN is the DN

(Distinguished Name) of a user

who has read access to the LDAP

directory. The account entered

here does not have to have

administrative access to the

directory. Read access is

sufficient.

The Administrator Password is

the password of the user whose

user DN was entered in the

Administrator DN field.

34 Chapter 3 Configuring the product from the Settings screens ENWW

Settings

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 97 98

Comments to this Manuals

No comments

Hp 9250c Digital-Sender User Manual Page 44

Comments to this Manuals

Related products and manuals for Scanners Hp 9250c Digital-Sender