Hp LaserJet Pro CP1025nw Color Printer User Manual download pdf (Page 45)

To prevent other users from accessing your network, turn on WPA or WEP data encryption.

●

Wired Equivalent Privacy (WEP): WEP is the original native security mechanism in the 802.11

standard. You create a unique key containing hexadecimal or alphanumeric characters, which

other users must provide before they can access your network.

●

Wi-Fi Protected Access (WPA): WPA uses the temporal key integrity protocol (TKIP) for encryption

and employs 802.1X authentication. It addresses all known weaknesses of WEP. You create a

unique passphrase containing a combination of letters and numbers, which other users must

provide before they can access your network.

●

WPA2 provides the advanced encryption standard (AES), and is an improvement over WPA.

Configure network settings

View or change network settings

Use the embedded Web server to view or change IP configuration settings.

1. Print a configuration page, and locate the IP address.

●

If you are using IPv4, the IP address contains only digits. It has this format:

xxx.xxx.xxx.xxx

●

If you are using IPv6, the IP address is a hexadecimal combination of characters and digits. It

has a format similar to this:

xxxx::xxxx:xxxx:xxxx:xxxx

2. To open the HP Embedded Web Server, type the IP address (IPv4) into the address line of a Web

browser. For IPv6, use the protocol established by the Web browser for entering IPv6 addresses.

3. Click the Networking tab to obtain network information. You can change settings as needed.

ENWW

Connect to a network (network models only)

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 185 186

No comments

Hp LaserJet Pro CP1025nw Color Printer User Manual Page 45