HP ProLiant Smart Array E200 Specifications download pdf (Page 49)

Removal and replacement procedures 49

After you replace the system board, you must re-enter the server serial number and the product ID.

1. During the server startup sequence, press the F9 key to access RBSU.

2. Select the System Options menu.

3. Select Serial Number. The following warning is displayed:

WARNING! WARNING! WARNING! The serial number is loaded into the system

during the manufacturing process and should NOT be modified. This option

should only be used by qualified service personnel. This value should

always match the serial number sticker located on the chassis.

4. Press the Enter key to clear the warning.

5. Enter the serial number and press the Enter key.

6. Select Product ID.

7. Enter the product ID and press the Enter key.

8. Press the Esc key to close the menu.

9. Press the Esc key to exit RBSU.

10. Press the F10 key to confirm exiting RBSU. The server will automatically reboot.

System battery

If the server blade no longer automatically displays the correct date and time, you may need to replace

the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.

WARNING: The computer contains an internal lithium manganese dioxide, a vanadium

pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not

properly handled. To reduce the risk of personal injury:

• Do not attempt to recharge the battery.

• Do not expose the battery to temperatures higher than 60°C (140°F).

• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.

• Replace only with the spare designated for this product.

To remove the component:

1. Power down the server blade (on page 24).

2. Remove the server blade (on page 24).

3. Remove the access panel ("Access panel" on page 25).

4. Remove all hard drives ("Hard drive" on page 26).

5. Remove all hard drive blanks ("Hard drive blank" on page 26).

6. Remove the hard drive backplane ("Hard drive backplane" on page 29).

7. Remove the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on

page 31).

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 64 65

No comments

HP ProLiant Smart Array E200 Specifications Page 49