HP ProLiant Smart Array E200 Specifications download pdf (Page 39)

Removal and replacement procedures 39

3. Install the heatsink.

4. Install the front panel/hard drive cage assembly ("Front panel/hard drive cage assembly" on page

31).

5. Install the hard drive backplane ("Hard drive backplane" on page 29).

6. Install the hard drives ("Hard drive" on page 26).

7. Install the hard drive blanks ("Hard drive blank" on page 26).

8. Install the access panel ("Access panel" on page 25).

9. Install the server blade.

Processor

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent possible server malfunction, do not mix processors of different speeds or

cache sizes. Refer to the label on the processor heatsink for a description of the processor.

CAUTION: To prevent possible server blade overheating, always populate processor socket 2

with a processor and a heatsink or a processor socket cover and a heatsink blank.

IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the

server blade does not power up.

To remove the component:

1. Power down the server blade (on page 24).

2. Remove the server blade (on page 24).

3. Remove the access panel ("Access panel" on page 25).

4. Remove all hard drives ("Hard drive" on page 26).

5. Remove all hard drive blanks ("Hard drive blank" on page 26).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 64 65

No comments

HP ProLiant Smart Array E200 Specifications Page 39