HP 425s Specifications download pdf (Page 66)

3-34

Perform Substep A for systemswith a Boot R~M revisionof 2.0or

greater. Perform Substep B for systemswith a Boot ROM retilon less

than 20.

A. For Boot ROMs with a revision of 2.0 or gwater, type the following

command

dom <Return>

After the double beep, type <Return > to set permanent Domain

compatible mcde and reset the system.Then go to Step 8.

For Boot ROMs with a pre-2.O revkion, when the systemdisplays

system search mode on the bottom of the screen, display

the Configuration Control menu by typing the followingcommand

c <Return>

Select the BcmtMode Selection menu by typing the followingat the

prompt:

Type [key ] Return ? 3 <Return>

Go to Step 6.

Select the Boot Mode Selection menu by typing the followingat the

prompt

Type [key] Return ? 2 <Return>

Select Permanent Domain Compatible mode by typing the followingat

the prompts

Type [key ] Return ? 1 <Return>

Type T or P Return ? p <Return>

Store the Domain Compatible mode selection in the EEPROM by

typing the followingcommand:

After the double beep, type c Return>.

If in SERVICE mode, the system displaysthe MD header and MD

prompt. If in NORMAL mode, the systemexecutes Self Tat diagnos-

tics and boots Domain/OS. Refer to the Senkr400

Workstation Do-

main/OS Owner’s Guide

for more detailed information about selecting

operating modes.

Configuration

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 142 143

No comments

HP 425s Specifications Page 66