HP OFFICEJET 7300 User Manual Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 242
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
Paper Tips
HP papers HP Premium Paper: Locate the gray arrow on the nonprinting side
of the paper, and then slide the paper into the input tray with the
arrow side facing up.
HP Premium Inkjet Transparency Film: Insert the film so that the
white transparency strip (with arrows and the HP logo) is on top and
is going into the input tray first.
Note The HP all-in-one might not automatically detect
transparency film if it is loaded incorrectly, or if you use
transparency film other than HP transparency film. For best
results, set the paper type to transparency film before printing
or copying onto transparency film.
HP Iron-On Transfers: Flatten the transfer sheet completely before
using it; do not load curled sheets. (To prevent curling, keep transfer
sheets sealed in the original package until you are ready to use
them.) Locate the blue stripe on the nonprinting side of the transfer
paper and then manually feed one sheet at a time into the input tray
with the blue stripe facing up.
HP Matte Greeting Cards, HP Photo Greeting Cards, or
HP Textured Greeting Cards: Insert a small stack of HP greeting
card paper into the input tray with the print side down; slide the stack
of cards forward until it stops.
Labels
(for printing from a
software application
only)
Always use letter or A4 label sheets designed for use with HP inkjet
devices (such as Avery inkjet labels), and make sure that the labels are
not more than two years old.
1 Fan the stack of labels to make sure none of the pages are sticking
together.
2 Place a stack of label sheets on top of full-size plain paper in the
input tray, label side down. Do not insert labels one sheet at a time.
Continuous banner
paper
(for printing from a
software application
only)
Continuous banner paper is also known as computer or z-fold paper.
1 Remove the output tray.
2 Remove all paper from the input tray.
Note Leave the output tray off of the HP all-in-one while the
banner prints to prevent the continuous banner paper from
tearing.
3 Verify that the stack of banner paper contains at least five pages in
the stack.
Note If you use non-HP banner paper, make sure you use 20-lb.
paper.
4 Carefully tear off the perforated edge strips from both sides of the
paper stack, if any, and unfold and refold the paper to make sure the
pages do not stick together.
User Guide 37
Load originals and load paper
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 241 242

Comments to this Manuals

No comments