HP L7780 User Manual Page 208

  • Download
  • Add to my manuals
  • Print
  • Page
    / 245
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 207
Prepare the device for shipment
If after contacting HP Customer Support or returning to the point of purchase, you are requested
to send the device in for service, make sure you remove and keep the following items before
returning your device:
The ink cartridges and printheads
The control-panel faceplate
The power cord, USB cable, and any other cable connected to the device
Any paper loaded in the input tray
Remove any originals you might have loaded in the device
This section contains the following topics:
Remove the ink cartridges and printheads before shipment
Remove the control-panel faceplate
Remove the ink cartridges and printheads before shipment
Before you return the device, make sure you remove your ink cartridges and printheads.
NOTE: This information does not apply to customers in Japan.
To remove ink cartridges before shipment
1. Turn on the device and wait until the print carriage is idle and silent. If the device will not turn
on, skip this step and go to step 2.
NOTE: If the device does not turn on, you can unplug the power cord and then
manually slide the print carriage to the far right side to remove the ink cartridges.
2. Gently pull open the ink cartridge cover.
Appendix B
204 Support and warranty
Page view 207
1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 244 245

Comments to this Manuals

No comments