HP E4402B User Manual Page 85
- Page / 100
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Chapter 5 85
Options and Accessories
Accessories
The following four models are available:
Agilent E1779A Battery Pack
The E1779A is a battery pack that will power an Agilent analyzer for 80 to 114 minutes,
depending on the options installed in the analyzer. Refer to the E1779A Battery Pack
User’s Guide for more information.
Parallel Interface Cable
For use with Option A4H and 1AX. A 36-pin to 25-pin male-to-male 2 meter cable can be
used to connect supported printers to an analyzer. This cable must be IEEE-1284
compliant.
Printer
For use with Option A4H or 1AX. The DeskJet personal printers provide black and
white or color printing for another form of permanent records of your test results. The HP
LaserJet series printers are also compatible. The printers connect to the parallel interface
installed on the analyzer with either Option A4H (standard) or 1AX.
RF and Transient Limiters
The Agilent 11867A and 11693A RF Limiters protect the analyzer input circuits from
damage due to high power levels. The 11867A operates over a frequency range of dc to
1800 MHz and begins reflecting signal levels over 1 mW up to 10 W average power and
100 watts peak power. The 11693A microwave limiter (0.1 to 12.4 GHz, usable to 18 GHz)
guards against input signals over 1 milliwatt up to 1 watt average power and 10 watts
peak power.
The Agilent 11947A Transient Limiter protects the analyzer input circuits from damage
due to signal transients. It specifically is needed for use with a line impedance
stabilization network (LISN). It operates over a frequency range of 9 kHz to 200 MHz, with
10 dB of insertion loss.
RF Bridges
The Agilent 86205A 50 Ω RF bridge and 86207A 75 Ω RF bridge can be used to make
reflection measurements using an analyzer with tracking generator Option 1DN or 1DQ or
Table 5-2.
HP/Agilent Model
Number
Frequency Range
11974A 26.5 to 40.0 GHz
11974Q 33.0 to 50.0 GHz
11974U 40.0 to 60.0 GHz
11974V 50.0 to 75.0 GHz
- Getting Started Guide 1
- Additional Information 2
- Contents 3
- 1 Installation and Setup 5
- 6 Chapter 1 6
- Initial Inspection 7
- 8 Chapter 1 8
- Chapter 1 9 9
- Power Requirements 10
- Checking the Fuse 11
- AC Power Cord 11
- 12 Chapter 1 12
- Installation and Setup 12
- Table 1-3. AC Power Cords 13
- 14 Chapter 1 14
- Using an External Reference 16
- Firmware Revision 16
- Chapter 1 17 17
- Running Internal Alignments 18
- Printer Setup and Operation 19
- 22 Chapter 1 22
- Legal Information 23
- 24 Chapter 1 24
- Front and Rear Panel Features 25
- 2.1 Front Panel Overview 26
- −12.6 V, 150 mA maximum) 28
- Auto Align is on) every time 29
- 2.1.2 Display Annotations 30
- Freq Offset 31
- 2.2 Rear-Panel Features 33
- Chapter 2 37 37
- Rear-Panel Features 37
- 2.3 Key Overview 38
- Landscape 39
- Print Setup menu 39
- 3 Making a Basic Measurement 41
- 42 Chapter 3 42
- Making a Basic Measurement 42
- Using the Front Panel 43
- Creating a User Preset 44
- Viewing a Signal 45
- Setting Frequency Span 46
- , 5, 0, MHz 46
- , Mkr ➞ Ref Lvl 47
- 48 Chapter 3 48
- ≥26 dB above the noise 49
- 50 Chapter 3 50
- 52 Chapter 4 52
- File Menu Functions 53
- 54 Chapter 4 54
- Creating a directory 55
- Formatting a Floppy Disk 56
- Saving a File 57
- 58 Chapter 4 58
- Trace (2), Min Hold. Your 58
- Step 2. Save the file 59
- Loading a file 61
- Renaming a File 63
- Copying a File 64
- Deleting a File 65
- Using the Alpha Editor 66
- 5 Options and Accessories 67
- 68 Chapter 5 68
- Options and Accessories 68
- Option Descriptions 71
- Ω to 75 Ω Matching 72
- Additional Manual Set 0B1 73
- Premium 75
- FM demodulator (Option 106) 75
- Ω, 21.4 MHz IF output 77
- Ω, 21.4 MHz IF output that 79
- Limit lines 80
- Loss compensation 80
- Ω source impedance) 82
- Accessories 83
- External Keyboard 84
- GPIB Cable 84
- Agilent E1779A Battery Pack 85
- Parallel Interface Cable 85
- Printer 85
- RF and Transient Limiters 85
- RF Bridges 85
- RS-232 Cable 86
- Static Safe Accessories 86
- 6 In Case of Difficulty 87
- 88 Chapter 6 88
- In Case of Difficulty 88
- Table 6-1 Types of Messages 89
- Check the Basics 90
- Read the Warranty 92
- Service Options 92
- Calling Agilent Technologies 92
- Chapter 6 93 93
- 94 Chapter 6 94
- Chapter 6 95 95
- 96 Chapter 6 96
- Index-97 97
- Index-98 98
- Index-99 99
- Index-100 100
Related products and manuals for Measuring, testing & control HP E4402B
Measuring, testing & control HP 132A User Manual
(330 pages)
(330 pages)
© 2020, manymanuals.com. All rights reserved. | 0.328 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals