HP ZBook 15 G3 Base Model Mobile Workstation User Manual download pdf (Page 66)

LED board

Description Spare part number

LED board 848246-001

Before removing the LED board, follow these steps:

1. Turn o the computer. If you are unsure whether the computer is o or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the bottom cover (see Bottom cover on page 32).

5. Disconnect the battery (see Battery on page 34).

Remove the LED board:

1. Disconnect the LED board from the system board (1).

2. Lift to release the LED board cable from the adhesive that secures it to the computer (2).

3. Remove the Phillips PM2.5×3.0 screw (3) that secures the LED board to the computer.

4. Remove the LED board and cable from the computer (4).

5. Remove the LED board

Reverse this procedure to install the LED board.

54 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 206 207

No comments

HP ZBook 15 G3 Base Model Mobile Workstation User Manual Page 66