HP OmniBook XE3 Removal and Replacement 2-23
Removing the Hinge Saddle Set
(HP Authorized Service Providers Only)
Required Equipment
• Small Phillips screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove these additional assemblies:
• Keyboard cover (page 2-9).
• Keyboard (page 2-11).
• Display assembly (page 2-17).
• Top case (page 2-19).
3. Remove the two retaining screws from the bottom case.
Figure 2-17. Removing the Hinge Saddle Retaining Screws
Screws,
M2.5x8 mm
Comments to this Manuals