HP hp tx2000 User Manual download pdf (Page 71)

Pen holder

Description Spare part number

Pen holder tbd-001

Pen eject assembly 464113-001

Before removing the pen holder, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power cord.

Remove the battery (see

Battery on page 36).

Remove the following components:

Pen (see

Pen on page 37)

Hard drive (see

Hard drive on page 38)

Memory module compartment cover (see

Memory module on page 41)

Optical drive (see

Optical drive on page 40)

Keyboard (see

Keyboard on page 47)

Switch cover (see

Switch cover on page 49)

Display assembly (see

Display assembly on page 51)

Top cover (see

Top cover on page 54)

Power switch assembly (see

Power switch assembly on page 57)

System board (see

System board on page 60)

Remove the pen holder:

1. Remove the Phillips PM2.0×3.0 screw (1) that secures the pen eject assembly to the base enclosure.

2. Remove the pen eject assembly (2).

3. Remove the two Phillips PM2.0×3.0 screws (3) that secure the pen holder to the base enclosure.

Component replacement procedures 63

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 125 126

No comments

HP hp tx2000 User Manual Page 71