HP hp tx2000 User Manual download pdf (Page 46)

Hard drive

Description Spare part number

5400-rpm, 320-GB 463643-002

5400-rpm, 250-GB 457061-002

5400-rpm, 160-GB 441128-002

5400-rpm, 120-GB 441127-002

Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector, and hard drive screws) 463644-001

Before removing the hard drive, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power cord.

Remove the battery (see

Battery on page 36).

Remove the hard drive:

Position the computer with the front toward you.

2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the

computer.

3. Lift the left side of the hard drive cover (2) and swing it to right.

Remove the hard drive cover.

NOTE: The hard drive cover is included in the Plastics Kit, spare part number 464114-001.

5. Grasp the Mylar tab (1) on the hard drive and lift the hard drive to disconnect it from the system

board.

38 Chapter 4 Removal and replacement procedures

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 125 126

No comments

HP hp tx2000 User Manual Page 46