HP Chromebook 14 G5 User Manual download pdf (Page 46)

Display assembly

NOTE: The display assembly is spared at the subcomponent level. For display assembly spare part information,

see the individual removal subsections.

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the computer.

4. Remove the keyboard/top cover (see Keyboard/top cover on page 21).

5. Disconnect the battery cable from the system board (see Battery on page 27).

Remove the display assembly:

1. Release the ZIF connector (1) to which the sensor board cable is connected, and then disconnect the sensor

board cable from the system board.

NOTE: Make sure the sensor board cable (2) is moved away from the routing channel through which the

wireless auxiliary antenna cable is routed.

2. Disconnect the WLAN antenna cables (3) from the terminals on the WLAN module.

NOTE: The WLAN antenna cable labeled "1/MAIN" connects to the WLAN module "Main" terminal. The

WLAN antenna cable labeled "2/AUX" connects to the WLAN module "Aux" terminal.

3. Disconnect the display webcam/microphone cable (4) from the system board.

4. Release the wireless auxiliary antenna cable from the retention clips (5) built into the bottom cover.

5. Release the wireless main antenna cable from the retention clips (6) built into the bottom cover.

6. Release the adhesive strip (7) that secures the display panel cable to the system board.

40 Chapter 5 Removal and replacement procedures

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 59 60

No comments

HP Chromebook 14 G5 User Manual Page 46