HP Chromebook 14 G5 User Manual download pdf (Page 31)

TouchPad cable

NOTE: The TouchPad spare part kit does not includes the TouchPad cable. The TouchPad cable is included in

the Cable Kit, spare part number L14330-001, and includes double-sided adhesive.

Before removing the TouchPad cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the computer.

4. Remove the keyboard/top cover (see Keyboard/top cover on page 21).

Remove the TouchPad cable:

1. Release the shielding material (1) that covers the TouchPad ZIF connector.

NOTE: The TouchPad shielding material is included in the Mylar Kit, spare part number L14346-001.

2. Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is attached to

the keyboard/top cover with double-sided adhesive.)

3. Release the ZIF connector (3) to which TouchPad cable is connected, and then disconnect

the TouchPad cable from the TouchPad.

4. Remove the TouchPad cable.

Reverse this procedure to install the TouchPad cable.

Component replacement procedures 25

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 59 60

No comments

HP Chromebook 14 G5 User Manual Page 31