HP 9470m User Manual download pdf (Page 74)

2. Lift the touchpad from the computer (2).

3. Remove the touchpad.

Reverse this procedure to install the touchpad.

NOTE: When replacing the touchpad, make sure to install the screws into holes closer to the edge of

computer.

Power connector

Description Spare part number

Power connector 702875-001

Before removing the power connector, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 41), and then remove the following components:

a. Hard drive cover (see

Hard drive cover on page 47)

b. Hard drive (see

Hard drive/SSD drive on page 48)

c. Service cover (see

Service cover on page 53)

66 Chapter 4 Removal and replacement procedures

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 143 144

No comments

HP 9470m User Manual Page 74