HP 9470m User Manual download pdf (Page 62)

Memory module

NOTE: Primary and expansion memory is installed in a stacked configuration in the bottom of

the computer.

Description Spare part number

8-GB memory module (PC3, 12800, 1600-MHz) 634091-001

4-GB memory module (PC3, 12800, 1600-MHz) 641369-001

2-GB memory module (PC3, 12800, 1600-MHz) 652972-001

Update BIOS before adding memory modules

Before adding new memory, make sure you update the computer to the latest BIOS.

CAUTION: Failure to update the computer to the latest BIOS prior to installing new memory may

result in various system problems.

To update BIOS:

1. Navigate to

www.hp.com.

2. Click Support & Drivers > Drivers & Software.

3. In the Enter a product name/number box, type the computer model information, and then

click Search.

4. Click the link for the computer model.

5. Select the operating system, and then click Next.

6. Under Step 2: Select a Download, click the BIOS link.

7. Click the link for the most recent BIOS.

8. Click the Download button, and then follow the on-screen instructions.

Before removing a memory module, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 41).

5. Remove the hard drive cover (see

Hard drive cover on page 47).

6. Remove the service cover

Service cover on page 53).

54 Chapter 4 Removal and replacement procedures

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 143 144

No comments

HP 9470m User Manual Page 62