HP 9470m User Manual download pdf (Page 56)

Hard drive/SSD drive

NOTE: The hard drive spare part kit does not include the hard drive bracket, connector, or screws.

The solid-state drive spare part kit includes the Hard Drive Hardware Kit, which includes the bracket,

connector, and screws..

Description Spare part number

Hard drive (does not include hard drive bracket or screws):

500-GB, 7200-rpm, 7-mm SED 703268-001

500-GB, 7200-rpm, 7-mm 703267-001

320-GB, 7200-rpm, 9.5-mm 603783-001

Solid-state drive (includes bracket, connector, and screws):

256-GB, SATA III, self-encrypting drive (SED) 702865-001

180-GB, SATA III 702864-001

mSATA SSD:

256-GB mSATA 702866-001

32-GB mSATA 702867-001

24-GB mSATA 702868-001

Hard Drive Hardware Kit (includes hard drive bracket, connector, and screws) 702870-001

Before removing the hard drive, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 41).

5. Remove the hard drive cover (see

Hard drive cover on page 47).

Remove the hard drive:

1. Loosen the 4 captive hard drive screws (1) that secure the drive to the computer.

2. Pull the hard drive tab (2) upward to disconnect the hard drive.

48 Chapter 4 Removal and replacement procedures

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 143 144

No comments

HP 9470m User Manual Page 56