HP 787801-251 Datasheet download pdf (Page 157)

Configuration, select AMT Options, and then select Un-configure AMT on next boot. Select Save,

and then select Yes. Select the File menu, and then select Save Changes and Exit. Reboot the

system and confirm that you want to un-configure AMT.

j. If the optional Intel® Anti-Theft Technology (AT) was activated, contact the provider to de-activate

it.

k. If the optional Absolute® Software Computrace® management and tracking service was activated

on the notebook PC, contact the provider to deactivate it.

l. Remove all power and system batteries for at least 24 hours.

2. Remove and retain the storage drive or clear the contents of the drive.

a. Hard Disk Drive (HDD)

Clear the HDD contents by using the HP Disk Sanitizer® utility or a third party application that,

ideally, is U.S. Department of Defense (DOD) 5220.22-M approved.

To run HP Disk Sanitizer, enter BIOS Setup by powering on the system and pressing F10 when

prompted near the bottom of the display, or press ESC to display the startup menu, and then press

F10. Select the Security menu, scroll down to the Utilities menu, and then select Hard Drive

Tools. Select Disk Sanitizer, and then select the desired drive. For a higher level of protection,

select Optimum.

NOTE: This process will take a long time, and the amount of time varies based on the hard drive

capacity.

b. Solid State Drive (SSD)

Clear the SSD contents by using the BIOS Setup Secure Erase command option, or by using a third

party utility designed to erase data from an SSD. To run Secure Erase, enter BIOS Setup by

powering on the system and pressing F10 when prompted near the bottom of the display. Select

the Security menu and scroll down to the Utilities menu. Select Secure Erase and select the

desired hard drive.

Non-volatile memory usage

Non Volatile

Memory Type

Amount

(Size)

Does this

memory

store

customer

data?

Does this

memory

retain data

when power

is removed?

What is the

purpose of this

memory?

How is data input into this

memory?

How is this memory write

protected?

Real Time Clock

(RTC) battery

backed-up CMOS

configuration

memory (CMOS)

256 Bytes No Yes Stores system

date and time

and limited

keyboard

controller data.

Using the F10 Setup utility or

changing the Microsoft®

Windows® date & time.

This memory is not write-

protected. HP

recommends password

protecting the F10 Setup

utility.

Controller (NIC)

EEPROM

64 Kbytes

(not customer

accessible)

No Yes Store NIC

configuration

and NIC

firmware.

Using a utility from the NIC

vendor that can be run from

DOS.

A utility is required to

write data to this memory

and is available from NIC

vendor. Writing data to

this ROM in an

inappropriate manner will

render the NIC non-

functional.

Non-volatile memory usage 149

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 165 166

Comments to this Manuals

No comments

HP 787801-251 Datasheet Page 157

Comments to this Manuals

Related products and manuals for Laptop spare parts HP 787801-251