Hp ProLiant DL380 G5 Server User Manual Page 84
- Page / 98
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
4 CR3500 RAID Array SCSI controller
Mass storage RAID Array
This section displays RAID array information. Five banners appear in this section.
RAID array status
• Status—Displays the status of the RAID array. The following conditions are valid:
• Good—The RAID array is fully operational.
• Reduced—The RAID array is operating in a degraded or reduced state. One or more of the physical drives
that make up the RAID array are either missing or failed. However, the RAID array can continue to operate
without data loss.
• Failed—The RAID array is not operational.
• Reconstructing—The RAID array is regenerating the data from a failed physical drive onto a replacement
drive that is part of the RAID array. All user data remains available during the reconstruction process, but
some performance reduction might occur when a request requires access to the device being reconstructed.
• Initialization—The controller is writing its file structure onto the member devices of a RAID array.
• RAID Level—Displays the RAID level and a brief description of the selected RAID array.
Drive information
Capacity—Displays the total capacity of the RAID array in megabytes
Physical drives
Physical Drive Channel—Displays the channel number, also referred to as the “port”
Physical Drive SCSI ID—Displays the SCSI ID number
Logical drives
Logical Drives—Lists the logical drives
Spare drives
Controller—Displays the controller name.
Spare Status—Displays the status of the online spare drive. The following conditions are valid:
• Hot Spare—The drive attached to this channel is kept spinning whenever the controller is powered up. It is to be
automatically brought online to replace a failed drive.
• Warm Spare—The drive attached to this channel is not spun up until a disk in the array fails. It is to be
automatically brought online to replace a failed drive.
• Adding Spare—The drive is in the process of becoming a spare drive.
Mass Storage Physical
This section displays physical drives attached to the CR3500 RAID controller. Three banners appear in this section.
Physical Drive status
The following conditions are valid:
• On Line—The drive attached to this channel is a fully-functional member of this RAID set.
• Off Line—The drive attached to this channel is not a member of the RAID set.
• Hot Spare—The drive attached to this channel is kept spinning whenever the controller is powered up. It is to be
automatically brought online to replace a failed drive.
• Warm Spare—The drive attached to this channel is not spun up until a disk in the array fails. It is to be
automatically brought online to replace a failed drive.
• Creating—The drive is currently being created as part of a RAID set.
• Rebuilding—The drive is currently being rebuilt.
CR3500 RAID Array SCSI controller 84
- HP Insight Management Agents 1
- Contents 3
- Contents 4 4
- Browser requirements 5
- Obtaining JVM from Microsoft 6
- Obtaining JVM from Sun 6
- Introduction 8
- Overview 8
- Logging in 9
- System Management Homepage 10
- Header frame 11
- Body frame 13
- Home tab 13
- Settings tab 15
- SNMP Webagent 16
- Security 17
- User Preferences 18
- UI Properties 18
- Tasks Tab 19
- Logs tab 19
- Webapps tab 19
- Support tab 20
- Help tab 20
- 2 Agent information 21
- System Agent 22
- Sub system Classification 23
- Cooling and temperature 24
- Agent information 25 25
- Agent information 26 26
- Memory Summary 27
- Memory Details 27
- Processors 28
- PCI Devices 28
- Management Processor 29
- Battery 30
- Modem/COM Port Settings 30
- Operating System 31
- Logical Disk Space 32
- Server 33
- Agent information 34 34
- Network 35
- Processes 35
- Processor Utilization 36
- Agent information 37 37
- Agent information 38 38
- Agent information 39 39
- Identify Drives 40
- Physical Drive Information 41
- Agent information 42 42
- Logical Drive Information 43
- Predictive Indicators 44
- Problem Indicators 44
- Failure Indicators 45
- Statistics 46
- Agent information 48 48
- Identify Drive 49
- Associated Tape Drives 50
- Tape Drive Information 50
- Agent information 51 51
- Storage Systems 52
- Agent information 53 53
- IDE controllers 54
- IDE controller information 54
- IDE ATAPI devices 54
- IDE ATA disk drives 54
- Logical drives 55
- IDE ATA logical drives 55
- Physical drives 56
- Spare drives 56
- SCSI controllers 56
- Controller information 56
- SCSI device information 57
- Tape library 58
- Tape devices 59
- CD storage system 60
- CD Library Information 60
- CD-ROM drive information 61
- SCSI physical drives 62
- Drive indicators 63
- Drive statistics 64
- SCSI logical drives 65
- SCSI bus information 66
- System Configuration 67
- System Board 68
- Advanced Memory Protection 69
- Agent information 70 70
- ROM Microcode Patches 71
- General I/O Devices 71
- System Resources 72
- System Summery 72
- Enclosure Information 73
- Agent information 74 74
- Agent information 75 75
- Critical Error Log 76
- Agent information 77 77
- Correctable errors 78
- Power-On Messages 78
- Integrated Management Log 78
- Operating system overview 79
- Summary page 79
- File System page 80
- User Information page 80
- Connection page 81
- Loaded NLMs page 81
- Server Parameter page 82
- Physical Partition page 82
- Adapter Information page 83
- Mass storage RAID Array 84
- Mass Storage Physical 84
- Mass Storage controller 85
- Mass Storage Summary 85
- Environment Monitoring Unit 85
- External Expansion Cabinet 86
- Telephone numbers 87
- Appendix A Troubleshooting 88
- SNMP community string issues 90
- issues 90
- Insight Manager issues 91
- Other problems 93
- Glossary 95
- Glossary 96 96
Related products and manuals for Computer hardware Hp ProLiant DL380 G5 Server
(74 pages)© 2020, manymanuals.com. All rights reserved. | 1.225 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals