Hp ProLiant DL380 G5 Server User Manual Page 26
- Page / 98
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
• Disabled—ECC memory correction is supported, but errors are not logged for this device.
• When a certain rate of errors is exceeded the health driver automatically disables logging of these errors,
and sends an alarm. The errors are corrected, but are no longer logged. Logging is re-enabled when the
driver is reloaded or the operating system restarts.
• Not Supported—Logging of correctable memory errors is not available for this device. Either the device
does not support ECC memory or the driver is not loaded.
• Unknown—You may need to upgrade the driver software and/or Server Agents. The Server Agent cannot
determine the status of the devices.
Advanced Memory Protection (AMP)
This section displays the following information about the Advanced Memory Protection sub-system.
• AMP Mode Status—Displays status of the Advanced Memory Protection sub-system. The following states are
supported:
• Other / Unknown—The system does not support Advanced Memory Protection or the Management Agent
cannot determine the status.
• Not Protected—This system supports Advanced Memory Protection but the feature is disabled.
• Protected—The system supports Advanced Memory Protection. The feature is enabled but not engaged.
• Degraded—The system was protected, but the Advanced Memory Protection has been engaged; therefore
Advanced Memory Protection is no longer available.
• DIMM ECC—The system is protected via DIMM ECC only.
• Mirroring—The system is protected by Advanced Memory Protection in the mirrored mode. No DIMM
faults have been detected.
• Degraded Mirroring—The system is protected by Advanced Memory Protection in the mirrored mode. One
or more DIMM faults have been detected.
• Online Spare—The system is protected by Advanced Memory Protection in the Online Spare mode. No
DIMM faults have been detected.
• Degraded Online Spare—The system is protected by Advanced Memory Protection in the Online Spare
mode. One or more DIMM faults have been detected.
• RAID-XOR—The system is protected by Advanced Memory Protection in the RAID-XOR memory mode. No
DIMM faults have been detected.
• Degraded RAID-XOR—The system is protected by Advanced Memory Protection in the RAID-XOR memory
mode. One or more DIMM faults have been detected.
• Advanced ECC—The system is protected by Advanced Memory Protection in the Advanced ECC mode.
• Degraded Advanced ECC—The system is protected by Advanced Memory Protection in the Advanced ECC
mode. One or more DIMM faults have been detected.
• LockStep—The system is protected by Advanced Memory Protection in the LockStep mode.
• Degraded LockStep—The system is protected by Advanced Memory Protection in the LockStep mode. One
or more DIMM faults have been detected.
•
AMP Mode Available—Displays the options available:
• RAID-XOR—This system can be configured for Advanced Memory Protection using the RAID-XOR engine.
• Dual Board Mirroring—This system can be configured for Mirrored Advanced Memory Protection within a
dual memory board configuration. The mirrored memory may be swapped with memory on the same
memory board or with memory on the second memory board.
• Single Board Mirroring—This system can be configured for Mirrored Advanced Memory Protection within a
single memory board.
• Advanced ECC—This system can be configured for the Advanced ECC type of Advanced Memory Protection
• Mirroring (deprecated)—This system can be configured for Mirrored Advanced Memory Protection
• Online Spare—This system can be configured for Online Spare Advanced Memory Protection.
• LockStep—This system can be configured for LockStep Advanced Memory Protection.
• None—This system can not be configured for Advanced Memory Protection.
• Configured AMP Mode—Displays the currently active type of Advanced Memory Protection based on the types
available. The following connection states are supported:
• None \ Unknown—The Management Agent cannot determine the Advanced Memory protection fault
tolerance or system is not configured for AMP. You may need to upgrade your software.
• Online Spare—A single spare bank of memory is set-aside at boot time. If enough ECC errors occur, the
spare memory is activated and the memory experiencing the errors is disabled.
Agent information 26
- HP Insight Management Agents 1
- Contents 3
- Contents 4 4
- Browser requirements 5
- Obtaining JVM from Microsoft 6
- Obtaining JVM from Sun 6
- Introduction 8
- Overview 8
- Logging in 9
- System Management Homepage 10
- Header frame 11
- Body frame 13
- Home tab 13
- Settings tab 15
- SNMP Webagent 16
- Security 17
- User Preferences 18
- UI Properties 18
- Tasks Tab 19
- Logs tab 19
- Webapps tab 19
- Support tab 20
- Help tab 20
- 2 Agent information 21
- System Agent 22
- Sub system Classification 23
- Cooling and temperature 24
- Agent information 25 25
- Agent information 26 26
- Memory Summary 27
- Memory Details 27
- Processors 28
- PCI Devices 28
- Management Processor 29
- Battery 30
- Modem/COM Port Settings 30
- Operating System 31
- Logical Disk Space 32
- Server 33
- Agent information 34 34
- Network 35
- Processes 35
- Processor Utilization 36
- Agent information 37 37
- Agent information 38 38
- Agent information 39 39
- Identify Drives 40
- Physical Drive Information 41
- Agent information 42 42
- Logical Drive Information 43
- Predictive Indicators 44
- Problem Indicators 44
- Failure Indicators 45
- Statistics 46
- Agent information 48 48
- Identify Drive 49
- Associated Tape Drives 50
- Tape Drive Information 50
- Agent information 51 51
- Storage Systems 52
- Agent information 53 53
- IDE controllers 54
- IDE controller information 54
- IDE ATAPI devices 54
- IDE ATA disk drives 54
- Logical drives 55
- IDE ATA logical drives 55
- Physical drives 56
- Spare drives 56
- SCSI controllers 56
- Controller information 56
- SCSI device information 57
- Tape library 58
- Tape devices 59
- CD storage system 60
- CD Library Information 60
- CD-ROM drive information 61
- SCSI physical drives 62
- Drive indicators 63
- Drive statistics 64
- SCSI logical drives 65
- SCSI bus information 66
- System Configuration 67
- System Board 68
- Advanced Memory Protection 69
- Agent information 70 70
- ROM Microcode Patches 71
- General I/O Devices 71
- System Resources 72
- System Summery 72
- Enclosure Information 73
- Agent information 74 74
- Agent information 75 75
- Critical Error Log 76
- Agent information 77 77
- Correctable errors 78
- Power-On Messages 78
- Integrated Management Log 78
- Operating system overview 79
- Summary page 79
- File System page 80
- User Information page 80
- Connection page 81
- Loaded NLMs page 81
- Server Parameter page 82
- Physical Partition page 82
- Adapter Information page 83
- Mass storage RAID Array 84
- Mass Storage Physical 84
- Mass Storage controller 85
- Mass Storage Summary 85
- Environment Monitoring Unit 85
- External Expansion Cabinet 86
- Telephone numbers 87
- Appendix A Troubleshooting 88
- SNMP community string issues 90
- issues 90
- Insight Manager issues 91
- Other problems 93
- Glossary 95
- Glossary 96 96
Related products and manuals for Computer hardware Hp ProLiant DL380 G5 Server
(74 pages)© 2020, manymanuals.com. All rights reserved. | 1.569 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals