Hp ProLiant DL380 G5 Server User Manual Page 62
- Page / 98
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
• Duplex Top—This storage system is the top part of a duplexed unit.
• Duplex Bottom—This storage system is the bottom part of a duplexed unit.
• None—A duplex option is not installed.
• Power Supply Status—Displays the status of the Redundant Power supply. The following values are possible:
• OK—All component power supplies that make up the redundant power supply are in normal working order.
• Degraded—One of the component power supplies that make up the redundant power supply has failed.
The drive system (either a drive subsystem or a power supply for the main unit) continues to operate.
However, if the remaining power supply should fail, the drive system loses power and data loss could
occur. To correct this situation, schedule a time to bring the device down and replace the failed power
supply.
• Unknown—The Storage Agents do not recognize the redundant power supply. You might need to upgrade
your software.
• No Redundant Power Supply—This ProLiant server does not support a redundant power supply.
SCSI physical drives
Select a SCSI physical drive from the SCSI controller submenu to display the following information:
• Status—Displays the status of the physical drive selected. The following values are valid:
• OK—The physical drive is operating normally.
• Failed—The physical drive has failed and can no longer return data. The drive might need to be replaced.
• Not Configured—The physical drive is not configured. Ensure that all of the drive switches are properly set.
• Bad Cable—A physical drive is not responding. Check the cables connected to the drive.
• Predictive Failure—One of the physical drive thresholds has been exceeded.
• Offline—The physical drive is offline and can no longer return data. No further status is available.
• Missing was OK—A physical drive that was located in the system and had a status of OK has been
removed.
• Missing was Failed—A physical drive that was located in the system and had a status of failed has been
removed.
• Missing was Predictive Failure—A physical drive that was located in the system and had a status of
Predictive Failure has been removed.
• Missing was Offline—A physical drive that was located in the system and had a status of offline has been
removed.
• Unknown—The Storage Agents cannot determine the status of this drive. You might need to upgrade your
driver software or Storage Agents.
NOTE: OK, Predictive Failure, and Unknown are the only values associated with clients.
• Action—Displays the action that is required for this device. The possible values are valid:
• Replace Drive—Replace this drive.
• Replace S.M.A.R.T. Drive—A S.M.A.R.T. hard drive predicts imminent failure. Schedule replacement before
actual failure.
• No Action Required—The drive is operating normally and no action is required.
• Capacity—Displays the size of the physical drive in megabytes. A megabyte is 1,048,576 bytes.
Many hardware manufacturers use a megabyte value of 1,000,000 instead of 1,048,576. This might result in
discrepancies between the manufacturer’s stated size and the size reported by this application.
• Model—Displays the model of the SCSI physical drive.
• Firmware Version—Displays the firmware revision level of the SCSI physical drive.
• Serial Number—Displays the serial number assigned to the physical drive. This value is based on the serial
number as returned by the SCSI inquiry command, but might have been shortened due to space limitations. Use
this item for identification purposes.
• Service Hours—Displays the total number of hours that a physical drive has been operating. If physical drive
statistics are being saved across power cycles (check the SCSI Drive Statistics Preserved), then this value has
been kept since the physical drive was installed. Otherwise, this value has been kept since the driver was
loaded.
• S.M.A.R.T. Support—Indicates if S.M.A.R.T. support is available for this SCSI drive. The following values are
valid:
• Not Available—Predictive failure monitoring is not available for this drive.
Agent information 62
- HP Insight Management Agents 1
- Contents 3
- Contents 4 4
- Browser requirements 5
- Obtaining JVM from Microsoft 6
- Obtaining JVM from Sun 6
- Introduction 8
- Overview 8
- Logging in 9
- System Management Homepage 10
- Header frame 11
- Body frame 13
- Home tab 13
- Settings tab 15
- SNMP Webagent 16
- Security 17
- User Preferences 18
- UI Properties 18
- Tasks Tab 19
- Logs tab 19
- Webapps tab 19
- Support tab 20
- Help tab 20
- 2 Agent information 21
- System Agent 22
- Sub system Classification 23
- Cooling and temperature 24
- Agent information 25 25
- Agent information 26 26
- Memory Summary 27
- Memory Details 27
- Processors 28
- PCI Devices 28
- Management Processor 29
- Battery 30
- Modem/COM Port Settings 30
- Operating System 31
- Logical Disk Space 32
- Server 33
- Agent information 34 34
- Network 35
- Processes 35
- Processor Utilization 36
- Agent information 37 37
- Agent information 38 38
- Agent information 39 39
- Identify Drives 40
- Physical Drive Information 41
- Agent information 42 42
- Logical Drive Information 43
- Predictive Indicators 44
- Problem Indicators 44
- Failure Indicators 45
- Statistics 46
- Agent information 48 48
- Identify Drive 49
- Associated Tape Drives 50
- Tape Drive Information 50
- Agent information 51 51
- Storage Systems 52
- Agent information 53 53
- IDE controllers 54
- IDE controller information 54
- IDE ATAPI devices 54
- IDE ATA disk drives 54
- Logical drives 55
- IDE ATA logical drives 55
- Physical drives 56
- Spare drives 56
- SCSI controllers 56
- Controller information 56
- SCSI device information 57
- Tape library 58
- Tape devices 59
- CD storage system 60
- CD Library Information 60
- CD-ROM drive information 61
- SCSI physical drives 62
- Drive indicators 63
- Drive statistics 64
- SCSI logical drives 65
- SCSI bus information 66
- System Configuration 67
- System Board 68
- Advanced Memory Protection 69
- Agent information 70 70
- ROM Microcode Patches 71
- General I/O Devices 71
- System Resources 72
- System Summery 72
- Enclosure Information 73
- Agent information 74 74
- Agent information 75 75
- Critical Error Log 76
- Agent information 77 77
- Correctable errors 78
- Power-On Messages 78
- Integrated Management Log 78
- Operating system overview 79
- Summary page 79
- File System page 80
- User Information page 80
- Connection page 81
- Loaded NLMs page 81
- Server Parameter page 82
- Physical Partition page 82
- Adapter Information page 83
- Mass storage RAID Array 84
- Mass Storage Physical 84
- Mass Storage controller 85
- Mass Storage Summary 85
- Environment Monitoring Unit 85
- External Expansion Cabinet 86
- Telephone numbers 87
- Appendix A Troubleshooting 88
- SNMP community string issues 90
- issues 90
- Insight Manager issues 91
- Other problems 93
- Glossary 95
- Glossary 96 96
Related products and manuals for Computer hardware Hp ProLiant DL380 G5 Server
(74 pages)© 2020, manymanuals.com. All rights reserved. | 1.109 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals