Hp ProLiant BL460c Gen8 Server Blade User Manual Page 33
- Page / 83
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Hardware options installation 33
• Each channel must have a valid online spare configuration.
• Each channel can have a different valid online spare configuration.
• Each populated channel must have a spare rank:
o A single dual-rank DIMM is not a valid configuration.
o LRDIMMs are treated as dual-rank DIMMs.
Lockstep Memory population guidelines
For Lockstep memory mode configurations, observe the following guidelines:
• Observe the general DIMM slot population guidelines (on page 32).
• DIMM configuration on all channels of a processor must be identical.
• In multi-processor configurations, each processor must have a valid Lockstep Memory configuration.
• In multi-processor configurations, each processor may have a different valid Lockstep Memory
configuration.
• When high performance heatsinks are installed on the server blade, do not install DIMMs in channel 2
or channel 4.
Population order
For memory configurations with a single processor or multiple processors, populate the DIMM slots in the
following order:
• LRDIMM: Sequentially in alphabetical order (A through H)
• RDIMM: Sequentially in alphabetical order (A through H)
• UDIMM: A through D, sequentially in alphabetical order. Do not populate DIMM slots E through H.
After installing the DIMMs, use RBSU to configure Advanced ECC, online spare, or lockstep memory support.
Installing a DIMM
CAUTION: To avoid damage to the hard drives, memory, and other system components, the air
baffle, drive blanks, and access panel must be installed when the server is powered up.
CAUTION: To avoid damage to the hard drives, memory, and other system components, be sure
to install the correct DIMM baffles for your server model.
1. Power down the server ("Power down the server blade" on page 11).
2. Remove the server blade (on page 12).
3. Remove the access panel (on page 13).
4. Remove all DIMM baffles ("Remove the DIMM baffle" on page 13).
5. Locate the DIMM tool ("DIMM tool location" on page 10) and remove it from the DIMM baffle.
6. Use the DIMM tool to open the DIMM slot.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Drive LED definitions 7
- System board components 8
- DIMM slot locations 9
- HP c-Class Blade SUV Cable 10
- Operations 11
- Remove the server blade 12
- Remove the access panel 13
- Install the access panel 13
- Remove the DIMM baffle 13
- Remove the SAS controller 15
- Install the SAS controller 15
- Operations 16 16
- Overview 17
- Connecting to the network 19
- Installing a server blade 20
- Completing the configuration 21
- Introduction 22
- Drive option 22
- Processor option 23
- Memory options 27
- HP SmartMemory 28
- DIMM identification 30
- Memory configurations 30
- Online spare population 32
- Installing a DIMM 33
- Mezzanine card option 34
- FBWC capacitor pack 36
- Cabling 42
- USB devices 43
- Troubleshooting 45
- Server mode 46
- HP product QuickSpecs 46
- HP iLO Management Engine 46
- Active Health System 47
- Intelligent Provisioning 48
- Scripting Toolkit 49
- HP Service Pack for ProLiant 50
- HP ROM-Based Setup Utility 51
- Boot options 52
- Configuring AMP modes 52
- Utilities and features 53
- ROMPaq utility 54
- Automatic Server Recovery 54
- Keeping the system current 55
- Software and firmware 56
- Version control 56
- ProLiant servers 56
- Battery replacement 58
- FCC rating label 59
- Modifications 60
- • EMC Directive 2004/108/EC 61
- • RoHS Directive 2011/65/EU 61
- Japanese notice 62
- BSMI notice 62
- Korean notice 62
- Chinese notice 63
- Ukraine notice 63
- Laser compliance 63
- Battery replacement notice 64
- Wireless devices 64
- Brazilian notices 65
- Canadian notices 65
- Japanese notices 65
- Taiwan notices 66
- Electrostatic discharge 67
- Specifications 68
- Support and other resources 69
- Customer Self Repair 71
- Reparo feito pelo cliente 73
- Acronyms and abbreviations 77
- Documentation feedback 79
- Index 80 80
- Index 81 81
- Index 82 82
- Index 83 83
Related products and manuals for Computer hardware Hp ProLiant BL460c Gen8 Server Blade
(118 pages)© 2020, manymanuals.com. All rights reserved. | 0.308 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals