Hp Integrity Superdome 2 Server User Manual Page 87
- Page / 217
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
SHOW OA INFO
• Command:
SHOW OA INFO [ALL | <bay number> [{ , | - } <bay number>]]
• Description:
Displays information about the Onboard Administrator. If the Onboard Administrator is not
specified, the command defaults to the Active Onboard Administrator.
• Access level/Bay level:
All
• Restrictions:
None
• Example:
sphere-oa2> show oa info 1
Onboard Administrator #1 information:
Model: Superdome 2 Onboard Administrator
Part Number: AH389-60001
Spare Part Number: AH389-60001
Serial Number: OA8CBK0069
UUID: 02OA8CBK0069
Manufacturer: HP
Firmware Bundle Revision: 0.6.35
Hw Version: A01
SHOW OA NETWORK
• Command:
SHOW OA NETWORK [ALL | <bay number> [{ , | - } <bay number>]]
• Description:
Shows the network configuration for the specified Onboard Administrator. If you do not specify
the Onboard Administrator, the command defaults to the Active Onboard Administrator.
• Access level/Bay level:
All
• Restrictions:
None
• Example:
OA-0018FE27577F> SHOW OA NETWORK
Onboard Administrator #1 Network Information:
Name: OA-1234E2124L7F
DHCP: Enabled - Dynamic DNS
IP Address: 16.84.190.253
Netmask: 123.456.78.9
Gateway Address: 123.58.36.44
Primary DNS: 12.345.65.78
Secondary DNS: 12.345.67.88
MAC Address: 00:18:FE:27:57:7F
Link settings: Forced 100 Mbit - Full Duplex
Link Status: Active
SHOW OA INFO 87
- Abstract 1
- Contents 3
- 4 Contents 4
- Contents 5 5
- 6 Contents 6
- Contents 7 7
- 8 Contents 8
- Contents 9 9
- 10 Contents 10
- 1 Accessing the CLI 11
- 2 Command line 13
- Account authentication 15
- LDAP users 16
- 3 General commands 17
- 18 General commands 18
- 4 Rack commands 19
- CONNECT ENCLOSURE 20
- UPLOAD DEBUG 21
- UPLOAD SYSLOG 21
- 5 User account commands 22
- ASSIGN OA 23
- DISABLE USER 23
- DISABLE STRONG PASSWORDS 23
- ENABLE STRONG PASSWORDS 24
- ENABLE USER 24
- REMOVE USER 25
- SET MINIMUM PASSWORD LENGTH 25
- SET PASSWORD 25
- SET SESSION TIMEOUT 26
- SET USER ACCESS 26
- SET USER CONTACT 26
- SET USER FULLNAME 27
- SET USER PASSWORD 27
- SHOW PASSWORD SETTINGS 28
- SHOW SESSION TIMEOUT 28
- SHOW USER 28
- UNASSIGN 29
- UNASSIGN OA 30
- DISABLE CRL 31
- DISABLE TWOFACTOR 31
- DOWNLOAD CA CERTIFICATE 31
- DOWNLOAD USER CERTIFICATE 32
- REMOVE CA CERTIFICATE 32
- REMOVE USER CERTIFICATE 32
- SHOW CA CERTIFICATE 32
- SHOW TWOFACTOR INFO 33
- 7 Directory commands 34
- ASSIGN OA LDAP GROUP 35
- DISABLE LDAP 35
- DOWNLOAD LDAP CERTIFICATE 35
- ENABLE LDAP 36
- REMOVE LDAP CERTIFICATE 36
- REMOVE LDAP GROUP 36
- SET LDAP GROUP ACCESS 37
- SET LDAP GROUP DESCRIPTION 37
- SET LDAP NAME MAP 37
- SET LDAP PORT 38
- SET LDAP SEARCH 38
- SET LDAP SERVER 38
- SHOW LDAP CERTIFICATE 38
- SHOW LDAP GROUP 39
- SHOW LDAP INFO 39
- TEST LDAP 40
- UNASSIGN for LDAP 40
- UNASSIGN OA LDAP GROUP 41
- 8 HP SIM commands 42
- SET HPSIM TRUST MODE 43
- SHOW HPSIM INFO 43
- 9 General management commands 44
- Generate certificate prompts 45
- SET FACTORY 46
- SET SCRIPT MODE 47
- SHOW ALL 47
- SHOW INTERCONNECT SESSIONS 49
- SHOW USER SESSIONS 49
- ADD EBIPA 51
- DISABLE EBIPA 51
- ENABLE EBIPA 51
- REMOVE EBIPA 52
- SET EBIPA 52
- SHOW EBIPA 53
- ADD OA DNS 55
- ADD SNMP TRAPRECEIVER 55
- ADD SSHKEY 55
- ADD TRUSTED HOST 56
- CLEAR SSHKEY 56
- CLEAR VCMODE 56
- DISABLE ALERTMAIL 57
- DISABLE ENCLOSURE_IP_MODE 57
- DISABLE HTTPS 57
- DISABLE SECURESH 58
- DISABLE SNMP 58
- DISABLE TELNET 58
- DISABLE TRUSTED HOST 59
- DISABLE XMLREPLY 59
- DISABLE WSMANAGEMENT 59
- DOWNLOAD CONFIG 59
- DOWNLOAD SSHKEY 60
- ENABLE ALERTMAIL 60
- ENABLE ENCLOSURE_IP_MODE 60
- ENABLE HTTPS 61
- ENABLE SECURESH 61
- ENABLE SNMP 61
- ENABLE TELNET 62
- ENABLE TRUSTED HOST 62
- ENABLE XMLREPLY 62
- ENABLE WSMANAGEMENT 62
- TEST WSMAN 63
- REMOVE OA DNS 63
- REMOVE SNMP TRAPRECEIVER 63
- REMOVE TRUSTED HOST 64
- SET ALERTMAIL MAILBOX 64
- SET ALERTMAIL SENDERDOMAIN 64
- SET ALERTMAIL SMTPSERVER 64
- SET OA GATEWAY 65
- SET OA NAME 65
- SET OA UID 65
- SET IPCONFIG 66
- SET SNMP COMMUNITY 66
- SET SNMP CONTACT 67
- SET SNMP LOCATION 67
- SHOW NETWORK 67
- SHOW SNMP 69
- SHOW SSHFINGERPRINT 69
- SHOW SSHKEY 70
- TEST ALERTMAIL 70
- TEST SNMP 70
- CLEAR SYSLOG 71
- DISABLE GUI_LOGIN_DETAIL 71
- DISABLE LLF 71
- ENABLE GUI_LOGIN_DETAIL 71
- ENABLE LLF 72
- POWEROFF XFABRIC 72
- POWERON XFABRIC 72
- RESTART OA 73
- SET DISPLAY EVENTS 73
- SET ENCLOSURE ASSET 73
- SET ENCLOSURE NAME 74
- SET ENCLOSURE PART_NUMBER 74
- SET ENCLOSURE PDU_TYPE 74
- SET ENCLOSURE SERIAL_NUMBER 75
- SET ENCLOSURE UID 75
- SET IOX UID 75
- SET LLF INTERVAL 75
- SET POWER MODE 76
- SET POWER LIMIT 76
- SET POWER SAVINGS 76
- SET TIMEZONE 77
- SHOW CONFIG 77
- SHOW DATE 78
- SHOW DISPLAY EVENTS 78
- SHOW ENCLOSURE FAN 79
- SHOW ENCLOSURE INFO 79
- SHOW ENCLOSURE LCD 80
- SHOW ENCLOSURE POWERSUPPLY 81
- SHOW ENCLOSURE STATUS 82
- SHOW ENCLOSURE TEMP 83
- SHOW FRU 84
- SHOW FRU 85 85
- SHOW OA CERTIFICATE 86
- SHOW OA INFO 87
- SHOW OA NETWORK 87
- SHOW OA STATUS 88
- SHOW POWER 88
- SHOW SYSLOG 89
- SHOW SYSLOG OA 90
- SHOW VCMODE 91
- UPLOAD CONFIG 91
- CLEAR NTP 92
- DISABLE NTP 92
- ENABLE NTP 92
- RESTART COMPLEX 93
- SET COMPLEX NAME 93
- SET DATE 94
- SET NTP PRIMARY 94
- SET NTP SECONDARY 95
- SHOW COMPLEX INFO 95
- SHOW COMPLEX STATUS 96
- 14 Blade management commands 97
- SHOW BLADE INFO 98
- SHOW BLADE LIST 99
- SHOW BLADE NAMES 100
- SHOW BLADE PORT MAP 100
- SHOW BLADE POWERDELAY 101
- SHOW BLADE STATUS 102
- SHOW BLADE TEMP 103
- SHOW IOX INFO 104
- SHOW IOX POWER 105
- SHOW IOX LIST 105
- SHOW IOX STATUS 106
- SHOW IOX STATUS 107 107
- ASSIGN INTERCONNECT 108
- CLEAR INTERCONNECT SESSION 108
- CONNECT INTERCONNECT 108
- POWEROFF INTERCONNECT 109
- POWERON INTERCONNECT 109
- RESTART INTERCONNECT 109
- SET INTERCONNECT POWERDELAY 110
- SET INTERCONNECT UID 110
- SET XFM UID 110
- SHOW GPSM INFO 111
- SHOW GPSM STATUS 111
- SHOW INTERCONNECT INFO 112
- SHOW INTERCONNECT LIST 113
- SHOW INTERCONNECT PORT MAP 114
- SHOW INTERCONNECT POWERDELAY 114
- SHOW INTERCONNECT STATUS 115
- SHOW XFM INFO 115
- SHOW XFM LIST 117
- SHOW XFM STATUS 117
- Link 7: Unknown 118
- Link 8: Unknown 118
- 17 Enclosure DVD commands 119
- SET DVD UID 120
- 18 Remote syslog commands 121
- SHOW SYSLOG SETTINGS 122
- TEST SYSLOG 122
- 19 USB support commands 123
- UPLOAD CONFIG using USB key 124
- 20 iCAP commands 125
- ICAPMODIFY 126
- • Access level/Bay level: 127
- Operator or Admin 127
- • Restriction: 127
- 21 Partition commands 128
- UNASSIGN PARTITION 129
- PARCREATE 129
- PARMODIFY 132
- The options for the command: 133
- ◦ HPUX_11iV3 (default) 134
- PARREMOVE 135
- PARSTATUS 135
- OA Administrator, OA Operator 137
- • Example: 137
- POWEROFF PARTITION 139
- POWERON PARTITION 139
- REBOOT PARTITION 140
- SET PARTITION DVD 140
- SHOW PARTITION DVD 141
- SHOW PARTITION INFO 142
- TOC PARTITION 143
- PARDEFAULT 143
- VPARCREATE 145
- VPARBOOT 146
- VPARMODIFY 147
- VPARRESET 148
- VPARREMOVE 149
- VPARSTATUS 150
- 22 Log viewer commands 152
- CONNECT PARTITION 153
- SHOW FPL 153
- SHOW LIVELOGS 153
- SHOW PARTITION CONSOLELOG 153
- SHOW SEL 154
- 23 Health Repository commands 155
- SHOW ACQUIT 157
- SHOW DECONFIG 158
- SHOW INDICT 159
- SHOW for the HR 160
- TEST CAMNET 161
- TEST FABRIC 162
- • Restrictions: 163
- SHOW CAE 164
- SHOW CAE 167 167
- SHOW ERRDUMP 168
- 26 Debug commands 169
- 27 Firmware update commands 170
- UPDATE SHOW FIRMWARE 171
- UPDATE SHOW NPARTITION 171
- SHOW INFO 172
- UPDATE FIRMWARE 172
- UPDATE FIRMWARE 173 173
- CLI UPDATE NPARTITION 174
- Effects messages 175
- 28 Updating Firmware 176
- All partitions update 177
- Blade update 177
- Warnings during update 177
- Errors during update 177
- Introduction 177
- Services unavailable 178
- Management Processor access 178
- Event logs 179
- IPMI Watchdog 179
- Partition ID 179
- Affected OS Commands 180
- Network Services to OA 180
- Frequently asked questions: 181
- Known issues: 181
- 182 Updating Firmware 182
- Online partition update 183
- 29 Archive Storage commands 185
- File downloaded successfully 187
- 30 Legacy console commands 189
- 190 Legacy console commands 190
- 31 Event notifications 192
- Before you contact HP 194
- HP contact information 194
- Subscription service 194
- Documentation feedback 194
- Related information 195
- Typographic conventions 195
- A Using event logs 197
- 198 Using event logs 198
- FPL viewer 199
- SEL viewer 200
- SEL viewer 201 201
- Health Repository viewer 202
- Acquitting indictments 203
- 204 Using event logs 204
- Viewing indictment acquittals 205
- 206 Using event logs 206
- B Time zone settings 207
- Americas time zone settings 208
- Asia time zone settings 209
- Oceanic time zone settings 210
- Europe time zone settings 210
- Polar time zone settings 211
- Xbar Crossbar 213
- XFM Xbar Fabric module 213
- 214 Index 214
- 216 Index 216
Related products and manuals for Computer hardware Hp Integrity Superdome 2 Server
(108 pages)© 2020, manymanuals.com. All rights reserved. | 1.170 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals