Hp Integrity Superdome 2 Server User Manual download pdf (Page 124)

UPLOAD CONFIG using USB key

• Command:

UPLOAD CONFIG { "<url>" | ARCHIVE "<filename>" | USB "<filename>"

}

• Description:

Uploads a script to the specified url which duplicates the current runtime configuration.

Supported protocols are ftp, tftp, usb and archive. The url should be formatted as

protocol://host/path/filename. The url syntax for IPv6 addresses is

protocol://[<ipv6 address>]/path/file. If your FTP server does not support

anonymous logins, you can specify a username and password within the url formatted as:

ftp://username:password@host/path/filename.

The file will be uploaded to a relative file path with a single slash between host and path. To

upload the file to an absolute file path, use a double slash between host and path.

To save a configuration file to a USB key or to the Archive Storage, use the USB or ARCHIVE

command and provide a filename. If this is a non-monarch OA and an Archive Storage

destination is provided, the file will be uploaded to the Archive Storage thumb drive in the

monarch OA.

Uploads a script to the specified URL, which duplicates the current runtime configuration.

Supported protocols are FTP, TFTP, and USB. The URL should be formatted as:

protocol://host/path/filename. If your FTP server does not support anonymous logins,

you can specify a user name and password within the URL formatted as:

ftp://username:password@host/path/filename. To save a configuration file to a

USB key, use the USB command and provide a file name.

• Access level/Bay level:

OA Administrator

• Restriction:

The user password is not saved or restored by the UPLOAD CONFIG command.

The TFTP server will not create new files, the destination file must exist on the server side and

must have sufficient permissions (a+w).

124 USB support commands

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 216 217

No comments

Hp Integrity Superdome 2 Server User Manual Page 124