Hp Lights-Out 100 Remote Management User Manual download pdf (Page 27)

Using LO 100 27

Platform event filtering configuration

The PEF Configuration screen enables you to configure LO 100 to take selected actions on received or

internally generated event messages. These actions include powering down the system, system reset, and

triggering the generation of an alert.

If you want to enable PEF functionality you must issue the following commands in the CLP:

cd map1

oemhp i 20 10 D0 18 00 12 01 03 D2

oemhp i 20 10 D0 18 00 12 02 3F 95

To configure a PEF for a particular sensor, click the PEF button to the far right of that sensor on the

Monitoring Sensors screen. The PEF button adjacent to each sensor opens a PEF Configuration page for

that sensor.

The PEF Configuration screen contains two sections: Current PEF Entries and Add PEF Entry. The Current

PEF Entries section includes Sensor Type, Sensor Name, PEF Action, and PEF Control information. The

Add PEF Entry section enables you set an action.

Initially, no entries are in the Current PEF Entries section because no PEFs are defined. When PEF entries

are defined, the PEF Control field is active and allows individual entries to be enabled, disabled, or

deleted.

To configure an action (PEF entry) select the desired Event Offsets and PEF Action settings and click Add.

• Event Offsets are trip points (movements across thresholds) that define what type of sensor event

triggers an action. The information in the Events Offsets section varies with the type of sensor. Not all

options are available for all sensors. You can select any of the available options.

• PEF Action displays the same information for all sensors:

o Sensor Type displays the type of sensor selected.

o Sensor Name displays the name of the sensor.

o PEF Action enables you to select from Power Off, Power Cycle, Hard Reset, and Send Alert

(requires a systems management console supporting IPMI 1.5 or later).

o PEF Control enables or disables the sensor.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

No comments

Hp Lights-Out 100 Remote Management User Manual Page 27