Hp Lights-Out 100 Remote Management User Manual download pdf (Page 26)

Using LO 100 26

To reset the server, enter reset /system1. For example:

/./system1/> reset

System1 reset.

Monitoring sensors

LO 100 provides operating system-independent remote monitoring of the current status of major sensors of

a target server including system temperature, fans, and voltage. You can view the data for this feature on

the Monitoring Sensors Page through a web browser or through the BIOS Setup Utility.

Viewing sensors data from a web browser

The Monitoring Sensors screen displays a snapshot of the temperature, fans, and voltage sensor data,

including sensor type, name, status, and current reading. To access this page from a web browser, click

Monitoring Sensors on the main menu navigation bar.

To update the display, click the Refresh button. To view or add a PEF action, click PEF. See "Platform

Event Filtering configuration (on page 27)" for more information.

Viewing sensors data from the BIOS Setup Utility

1. Press the F10 key during POST to enter the BIOS Setup Utility.

2. Press the right arrow (→) key to navigate to the Advanced menu.

3. Press the down arrow (↓) key to scroll to IPMI. Press the Enter key.

4. Press the down arrow (↓) key to scroll to the Hardware Health Information menu.

5. Press the Enter key.

The Loading data. Please wait… message appears. After this message disappears, the

Temperature and Voltage sensor data appears. This data is real-time data and is updated on a

periodic basis.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

No comments

Hp Lights-Out 100 Remote Management User Manual Page 26