Hp Lights-Out 100 Remote Management User Manual Page 11
- Page / 52
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Configuration 11
8. Press the Esc key to return to the previous screen, or press the F10 key to save the changes and exit
Setup.
Using TCP/IP over Ethernet management port
You can configure LO 100 LAN port access using two different Ethernet ports: the dedicated 10/100 LO
100 management port or through a side-band connection using the server NIC. The Share NIC option
utilizes one server Ethernet port for both server network traffic and LO 100 network traffic reducing the
number of network cables that you must attach to the server.
Selecting an Ethernet management port
To configure a shared Ethernet management port:
1. Power on the server by pressing the Power On/Off button on the front panel.
2. When POST displays the message, ROM-Based Setup, press the F10 key. If the server has an
administrator password configured, the system prompts you to enter the password. If the server does
not have a password configured, the main screen of the BIOS Setup Utility appears.
3. Press the right arrow (→) key to navigate to the Advanced menu.
4. Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key.
5. Press the down arrow (↓) key to scroll to the LAN Configuration menu. Press the Enter key. The LAN
Configuration screen appears.
6. Press the down arrow (↓) key to scroll to Share NIC Mode. Press the Enter key to toggle between
Enabled and Disabled. Select Enabled.
7. Press the Esc key to return to the previous screen, or press the F10 key to save the changes and exit
Setup.
The dedicated TCP/IP over Ethernet management port, whether dedicated or shared, is a standard
Ethernet 10/100Mb interface that is connected to the network using a standard Ethernet cable. Before
using the dedicated management port, you must determine the DHCP IP address, set a static IP address,
or use the default static IP address.
Obtaining a DHCP IP address from the BIOS Setup Utility
By default, LO 100 has DHCP enabled and automatically negotiates an IP address. To view the DHCP IP
address, run the BIOS Setup Utility or retrieve the DHCP IP address using CLP through the serial port
connection. To view the DHCP IP address using the BIOS Setup Utility:
1. Power on the server by pressing the Power On/Off button on the front panel.
2. When POST displays the message, ROM-Based Setup, press the F10 key. If the server has an
administrator password configured, the system prompts you to enter the password. If the server does
not have a password configured, the main screen of the BIOS Setup Utility appears.
3. Press the right arrow (→) key to navigate to the Advanced menu.
4. Press the down arrow (↓) key to scroll to IPMI. Press the Enter key.
5. To obtain the DCHP IP address:
a. Press the down arrow (↓) key to scroll to the LAN Configuration menu. Press the Enter key. The
LAN Configuration screen appears.
b. Press the down arrow (↓) key, and scroll to the end of the menu to display the DHCP IP address.
- User Guide 1
- Audience assumptions 2
- Contents 3
- Contents 4 4
- Operational overview 5
- LO 100 Virtual Media access 6
- Installation 7
- Post-installation procedures 8
- Configuration 9
- Using the serial port 10
- Updating the firmware 12
- Configuration 14 14
- Using LO 100 15
- Using SSH 16
- Using CLP 17
- Base commands 18
- Using LO 100 19 19
- Using LO 100 20 20
- Using LO 100 21 21
- IPMI 2.0 support 22
- Logging in to LO 100 23
- Browser main menu options 24
- Monitoring sensors 26
- Using the system event log 28
- Using Virtual KVM 29
- Using LO 100 30 30
- Mouse synchronization 33
- Using Virtual Media 34
- Shared virtual media devices 35
- Redirecting a Linux console 37
- Hardware Inventory page 38
- User administration 39
- Network settings 41
- Importing a certificate 43
- Creating a certificate 44
- HP SIM support 46
- Acronyms and abbreviations 47
- Index 50 50
- Index 51 51
- Index 52 52
Related products and manuals for Computer Accessories Hp Lights-Out 100 Remote Management
(161 pages)
(241 pages)
(39 pages)© 2020, manymanuals.com. All rights reserved. | 0.270 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals