Hp Integrated Lights-Out User Manual download pdf (Page 130)

Using iLO 2 130

o Manual—If your facility prefers static IP address assignment, you can individually change each

of the server blade iLO 2 ports and interconnect module management ports to unique static

addresses or use EBIPA to assign a range of static IP addresses to individual server blade and

interconnect module bays.

o EBIPA—When a server blade or interconnect module is inserted into a bay that has EBIPA

enabled, that management port will get the specific static IP address from the Onboard

Administrator if that device is configured for DHCP.

The administrator sets an independent range for server blade bays and interconnect module bays using

the Onboard Administrator EBIPA setup wizard. The first address in a range is assigned to the first bay

and then consecutive bays through the range.

For example, if you set the server bay EBIPA range to 16.100.226.21 to 16.100.226.36, the iLO 2 in

device bay #1 will be assigned 16.100.226.21 and the iLO 2 in device bay #12 is assigned

16.100.226.32. If you set the interconnect bay EBIPA range to 16.200.139.51 to 16.209.139.58, the

interconnect module management port in interconnect bay #1 will be assigned 16.200.139.51 and the

interconnect module management port in interconnect bay #7 will be assigned 16.200.139.57.

To enable EBIPA settings for the server bays in this enclosure, select Enable Enclosure Bay IP Addressing

for Server Bay iLO 2 Processors and then enter the following information.

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 235 236

No comments

Hp Integrated Lights-Out User Manual Page 130