HP R927 User Manual download pdf (Page 18)

Snow—For capturing scenes in snow.

Sunset—For capturing outdoor scenes at sunset.

Document—For capturing flat, textual, or graphical pieces.

Aperture Priority—For specifying the aperture setting. This mode lets you

select the F-number (aperture) setting using

, while the camera selects

the best shutter speed. If the image will be over- or under-exposed more than

0.5 stops, the F-number and shutter speed turn red. Adjust the F-number until

these items turn white. To change to a different shooting mode, press

until

arrows surround the shooting mode, then press

Shutter Priority—For specifying the shutter speed. This mode lets you select

the shutter speed using

, while the camera selects the best F-number. If

the image will be over- or under-exposed more than 0.5 stops, the F-number

and shutter speed turn red. Adjust shutter speed until these items turn white.

To change to a different shooting mode, press

until arrows surround the

shooting mode, then press

Manual—For specifying both F-number and shutter speed (see Using Manual

shooting mode on page 19).

My Mode—For a customizable shooting mode that lets you select, save, and

then repeatedly use a group of preferred settings (see Using My Mode

on page 19).

Note The shooting modes do not apply when you are recording video clips.

The shooting mode remains in effect until it is changed again, or until you turn off the

camera.

Using Panorama mode

Panorama mode allows you to take a sequence of 2 to 5 pictures that can be stitched

together to capture a scene too wide to fit into a single picture. To stitch your panoramic

sequence together, use Stitch Panorama on the camera (see Stitching panoramas

on page 29). Depending on the HP Photosmart Software version you installed

(see About the HP Photosmart Software on page 9), you can also stitch panoramas

automatically as you transfer them to your computer.

While in Live View, press

, use to select either Panorama (left to right)

Panorama (right to left), then press .

2. Press the Shutter button to take the first picture in the panoramic sequence.

Chapter 2

(continued)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 57 58

No comments

HP R927 User Manual Page 18