HP ew2500 Installation Manual download pdf (Page 10)

What you need to supply

●

A supported Microsoft Windows or Apple Macintosh computer with the included Network (LAN)

cable to configure wired and/or wireless settings.

For a wireless network: an 802.11b or 802.11g wireless LAN (WLAN) interface card installed in the

computer.

NOTE: Use the included LAN cable to avoid possible radio interference problems during

installation. After installation, you can remove the cable.

◦

Microsoft Windows XP, Vista, Server 2003, or Server 2008.

◦

Apple Mac OS X 10.2 and later.

◦

UNIX/Linux: Hewlett-Packard HP-UX, Sun Microsystems Solaris, IBM AIX, HP MPE-i, RedHat

Linux, SuSE Linux

If your network is entirely wireless, then a wireless computer is needed to set up a wireless

connection from your printer to your network.

●

For wireless infrastructure mode only: a wireless router, access point, or Apple base station.

In infrastructure mode, an access point is a device that connects wireless devices, such as a

wireless network printer, to your cabled network. See

Wireless LAN terms and concepts

on page 4 for more information.

●

For Windows systems: the printer’s software driver for your Windows system.

You can obtain your printer driver from one of the following sources:

◦

printing system CD-ROM supplied with your printer

◦

HP support Web site at:

www.hp.com/go/support.

2 Chapter 1 Introduction ENWW

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 57 58

No comments

HP ew2500 Installation Manual Page 10