Hp Storage Mirroring Software User Manual download pdf (Page 312)

C - 4

2. Create an IP Address resource for the new group.

a. Right-click the group that you just created and select New, Resource.

b. Specify the following fields on the New Resource dialog box:

! Name—Specify a name that identifies this resource as the IP address for the group. This name must be unique

within the cluster.

! Description—You can optionally add a more detailed description for this resource.

! Resource type—Specify IP Address.

! Group—The resource group name should be selected. If it is not, select the correct group name.

c. Click Next to continue.

d. Verify that both nodes appear as the Possible Owners and click Next to continue.

e. There are no Dependencies required for an IP address resource. Click Next to continue.

f. Specify the following fields on the TCP/IP Address Parameters dialog box:

! Address—Enter the static IP address that will be assigned to the virtual server.

! Subnet mask—Enter the subnet mask associated with the IP address you just entered.

! Network to use—If you have more than one route for network traffic defined, specify the network that this IP

address will use. This should be the same network that the clients are using.

g. Click Finish to complete the creation of the IP Address resource.

1 2 ... 307 308 309 310 311 312 313 314 315 316 317 ... 338 339

No comments

Hp Storage Mirroring Software User Manual Page 312