HP LaserJet 6L User Manual Page 78

  • Download
  • Add to my manuals
  • Print
  • Page
    / 204
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 77
Installing Memory Cards (DRAM)
1 Unplug the power cord from the printer. You
should not install a memory card while the
printer is in SleepMode.
2 Open the Printer Door, remove the toner
cartridge, and close the Printer Door. Protect
the toner cartridge from light while you are
working on the printer.
3 Remove any paper in the paper tray. Gently
tip the printer onto its side so that the memory
cover is on top as shown in Figure 3.
4 Remove the Memory Expansion Cover by
carefully pulling the tab out and away from
the printer in a gentle rocking motion.
5 Align the memory card with the corner notch
so it is positioned as in Figure 4. Push it firmly
into the printer.
Replace the Memory Expansion Cover, set the
printer upright, reinstall the toner cartridge,
reinsert paper, and reconnect to the power source.
Print a self-test page (see Chapter 3) to check that
the printer recognizes the additional memory you
have added. Your Total Memory in the “Printer
Information” section will show the new MB total.
1 MByte card 2 MByte total
2 MByte card 3 MByte total
4 MByte card 5 MByte total
8 MByte card 9 MByte total
6
Removal and
Replacement
Removal and Replacement 6 - 5
Page view 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 203 204

Comments to this Manuals

No comments