HP LaserJet 6L User Manual Page 143

  • Download
  • Add to my manuals
  • Print
  • Page
    / 204
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 142
Half-Self Test Functional Check
The electrophotographic process can be subdivided into the following stages:
Cleaning (removing excess toner from drum surface)
Conditioning (placing a uniform electrical charge on drum)
Writing (laser strikes surface of drum to create latent image)
Development (formation of the toner image on drum)
Transfer (charge to transfer the image to paper)
Fusing (heat and pressure to produce a permanent image)
The purpose of the Half-Self Test Check is to determine which process is
malfunctioning. Perform the test as follows:
1 Initiate a self test.
2 Open the Printer Door after the paper advances half-way through the printer (about
8 seconds after the Motor begins rotation). The leading edge of the paper should
have advanced past the toner cartridge.
3 Remove the toner cartridge.
4 Open the toner cartridge’s drum shield to view the drum’s surface.
If a dark and distinct toner image is present on the drums surface, assume that the
first four functions of the electrophotographic process are functioning (cleaning,
conditioning, writing and developing - see Chapter 5.) Troubleshoot the failure as a
transfer or fusing problem.
If NO image is present on the photosensitive drum, perform the following functional
checks:
1 Make sure you have removed the entire length of the sealing tape from the toner
cartridge before you installed the cartridge.
2 Drum Rotation Functional Check.
3 High Voltage Power Supply Check.
7-22 Troubleshooting
Page view 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 203 204

Comments to this Manuals

No comments