HP Photosmart 1315 User Manual download pdf (Page 14)

hp photosmart 1315 color printer

printer basics

paper in the

IN tray

You can load many different types of paper in the IN tray, including plain

paper, HP Photo Paper, and HP Premium Inkjet Transparency Film.

To load paper in the IN tray:

1 Lift the OUT tray.

2 Pull out the IN tray by using the handles on the side of the tray.

3 Pull out the paper length

guide on the IN tray and

slide the paper width guide

as far to the left as it will go.

4 Place a stack of paper into

the IN tray.

• Load the paper printing

side down. The printer

prints on the face-down

side of the paper; the

finished document faces

up in the OUT tray.

• Always load paper in

the portrait direction,

with the long edge

along the long edge of

the IN tray.

• Be careful not to use too much or too little paper. It may be

difficult for the printer to “grab” a sheet of paper when there are

only one or two sheets in the IN tray. Check that the stack of

paper contains several sheets but is no higher than the top of the

paper length guide.

• Use one type and size of paper at a time. Do not mix paper types

or sizes in the IN tray.

5 Move the slider (visible through a slot in the OUT tray) toward you

until it stops. This disengages the photo tray.

6 Adjust the paper width guide and paper length guide to fit close to the

edges of the paper without bending the paper. This helps the paper

feed straight into the printer.

7 Slide the IN tray back into place and lower the OUT tray.

Paper width

guide

Paper length

guide

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 77 78

Comments to this Manuals

No comments

HP Photosmart 1315 User Manual Page 14

Comments to this Manuals

Related products and manuals for Photo printers HP Photosmart 1315