HP Vectra VL410 Troubleshooting Guide download pdf (Page 36)

Upgrading and replacing hardware

Replacing the internal speaker

1 Switch off the PC and remove the PC’s cover. Refer to page 8.

2 Disconnect the speaker cable from the system board

3 Remove the speaker unit by sliding it free of the retaining clips.

4 Insert the new speaker.

5 Connect the end of the speaker cable to the system board.

6 Replace the PC’s cover. Refer to page 10.

internal speaker

connector

Desktop

Small form factor

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

No comments

HP Vectra VL410 Troubleshooting Guide Page 36