HP Vectra VL410 Troubleshooting Guide download pdf (Page 15)

Upgrading and replacing hardware

Cables and connectors in your pc

Internal devices such as the power supply, processor, hard drives, DVD and CD-ROM drives require the

connection of data and power cables from device to system board. Cables are connected to the system

board and internal devices as shown below. You must also connect the power supply connector, status

panel connector and CD audio connector (if a CD-ROM is fitted) to the system board.

Power connector

CD-ROM, DVD,

CD-RW, Tape or

Zip drive

Hard drive(s)

Floppy drive

CD audio connector

Processor fan connector

(not used if a passive

heatsink is fitted, as

shown here)

Second serial port

Internal speaker

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

No comments

HP Vectra VL410 Troubleshooting Guide Page 15