HP Computer Technical Information download pdf (Page 82)

5. Remove the heat sink (2).

NOTE: Due to the adhesive quality of the thermal material located between the heat sink and

the system board components, it may be necessary to move the heat sink from side to side to

detach it.

NOTE: Steps 6 and 7 apply to computer models equipped with a graphics subsystem with

UMA memory.

6. Following the 1 through 4 sequence stamped into the heat sink, loosen the four Phillips

PM2.0×11.0 captive screws (1) that secure the heat sink to the system board.

72 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 130 131

No comments

HP Computer Technical Information Page 82