HP Armada m300 Specifications Page 45

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 44
2-22
Troubleshooting
Table 2-16
Problem Possible Cause Solution
Computer beeps only once when
a PC Card is inserted.
The computer beeps once to
indicate that a PC Card is
recognized but not properly
configured.
Before a new PC Card can be used, it
may be necessary to perform an initial
setup procedure. Follow the PC Card
manufacturer's instructions for
formatting a hard drive card or
installing PC Card-specific drivers for a
network card.
Network PC Card does not work. Necessary drivers are not
installed (turned on).
Refer to the instructions that came
with the PC Card or contact the
vendor for information on installing
the correct drivers.
PC Card is not fully inserted or is
upside down.
Ensure the PC Card is inserted
correctly.
Network PC Card or driver is not
PCMCIA compliant.
Check the list of PC Cards tested
successfully in Compaq PC Card
platforms.
Storage PC Card does not work. SRAM and flash memory PC
Cards require the memory card
driver to be loaded.
Memory cards can only be accessed
using DOS real mode drivers.
You are trying to access the
storage PC Card using the wrong
drive letter.
If you are running Windows 95,
change the drive letter assignment in
Device Manager
If you are running Windows NT 4.0,
change the drive letter assignment
through the Control Panel.
The PC Card is not formatted. For memory cards, run MCFORMAT in
MS-DOS Mode to format the PC Card.
For ATA cards, run ATAINIT, then run
MCFORMAT in MS-DOS Mode to
format the PC Card.
The card is not supported. Check the list of PC Cards tested
successfully in Compaq PC Card
platforms.
Storage cards, such as SRAM, do
not work in the expansion base.
Use the storage card in the computer.
Page view 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 101 102

Comments to this Manuals

No comments