HP 10BASE-T Installation Manual download pdf (Page 8)

HP AdvanceStack 10BT Switching Hubs Installation Guide

Connecting the Switching Hubs Together with Extender Cable

Attach the included Extender Cable from one hub to another:

The Extender Cable provides communication between the hubs. If you add an HP Management

Module, network management travels over this cable also. You can connect an Extender Cable when

the power is on or off. Never leave an Extender Cable unconnected at one end.

Longer Cables Option

If you need longer cable, order Long Extender Cable 71 cm (28 inch) (5182-9869) from

1-800-538-8787. Note that a maximum of two Long Extender Cables are allowed per stack.

Verify That the Hub Works Correctly

1. (Optional.) This product is supported by the HP J2962A Redundant Power Supply (RPS). If you

have this HP RPS, connect the RPS to the hub now.

Extender Cable

(can be installed

in this orientation

only)

Back of RPS

Back of Hub

0_INSTAL.FM5 Page 8 Friday, August 9, 1996 4:28 PM

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

No comments

HP 10BASE-T Installation Manual Page 8