HP IO Accelerator for BladeSystem c-Class Solaris User Manual download pdf (Page 28)

Utilities 28

• Manufacturer number

• Part number

• Date of manufacture

• Power loss protection status

• PCIe bus voltage (average, minimum, maximum)

• PCIe bus current (average, maximum)

• PCIe bus power (average, maximum)

• PCIe power limit threshold (watts)

• PCIe slot available power (watts)

• PCIe negotiated link information (lanes and throughput)

Block device information:

• Manufacturer's code

• Manufacturing date

• Vendor and sub-vendor information

• Format status and sector information (if device is attached)

• FPGA ID and Low-level format GUID

• PCIe slot available power

• PCIe negotiated link information

• Card temperature, in degrees Centigrade

• Internal voltage, average and maximum.

• Auxiliary voltage: average and maximum.

• Percentage of good blocks, data and metadata

• Lifetime data volume statistics

• RAM usage

Error mode information: If the IO Accelerator is in minimal mode, read-only mode, or write-reduced mode

when fio-status is run, the following differences occur in the output:

• Attach status is Status unknown: Driver is in MINIMAL MODE:

• The reason for the minimal mode state appears (for example, Firmware is out of date. Update

firmware.)

• "Geometry and capacity information not available." is displayed.

• No media health information appears.

fio-sure-erase

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 50 51

No comments

HP IO Accelerator for BladeSystem c-Class Solaris User Manual Page 28