
EN
Diagnostics on Accessories
425
2 3 Entry sensor delay
● Open all covers and doors in the device, and
remove any remaining media.
● Check each bin output.
● Perform a sensor check.
● Check the sensor flag, the optical sensor, or
cabling.
● Replace the sensor PCAs.
●
Replace the controller PCA.
2 5 Face-up sensor delay
2 7 Reversing area delay
2 9 Vertical sensor delay
24
Entry sensor activated
too long
● Open the top and back covers, and remove any
remaining media.
● Check each bin output.
● Perform a sensor check.
● Check the sensor flag, the optical sensor, or
cabling.
● Replace the sensor PCAs.
●
Replace the controller PCA.
26
Face-up sensor
activated too long
28
Reversing area sensor
activated too long
210
Vertical sensor
activated too long
11
Door open or interlock
switch deactivated
● Close the top cover and paper access door.
● Firmly attach the 7-bin Tabletop Mailbox to the
printer.
● Perform a sensor check.
●
Check the bin full and interlock sensor PCA,
cabling, and controller PCA.
1 2 Bin full when running
the standalone test
● Remove paper from all the bins.
Table 7-29. Patterns of Flashing LEDs (continued)
Long Short Meaning Recommended Action
Comments to this Manuals