
EN
2 x 500-sheet Input Tray
313
2 x 500-sheet Input Tray Pickup, Feed, and
Separation Rollers
There are three rollers in this assembly. The upper forward roller is
the Pickup Roller, the upper rear roller is the Feed Roller, and the
lower roller is the Separation Roller. The Feed and Separation Rollers
are interchangeable with each other and between the trays. The
Pickup Roller is interchangeable with the Pickup Rollers in Trays 2
and 3.
●
Pickup Roller: figure 6-143, callout 1
●
Feed Roller: figure 6-143, callout 2
●
Separation Roller: figure 6-143, callout 3
Figure 6-143 Pickup, Feed, and Separation Rollers
1
Remove the paper tray.
Note
The Feed and Separation Rollers have protruding retaining tabs, and
the Pickup Roller has recessed retaining tabs.
2
From inside the tray cavity, remove the rollers by pinching the
retainer tabs together and sliding the roller off the shaft.
Comments to this Manuals