HP ZBook 17 Mobile Workstation (ENERGY STAR) User Manual download pdf (Page 116)

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 46).

5. Remove the service door (see

Service door on page 48).

6. Remove the optical drive (see

Optical drive on page 57) or upgrade bay hard drive (see Upgrade

bay hard drive on page 59).

7. Remove the keyboard (see

Keyboard on page 63).

8. Remove the top cover (see

Top cover on page 72).

9. Remove the graphics board fan/heat sink assembly (see

Graphics board fan/heat sink assembly

on page 100).

Remove the graphics board:

1. Remove the 2 Torx T8M2.5×4.0 screws (1) that secure the graphics board to the system board.

2. Lift the right edge of the graphics board until it rests at an angle (2), and then remove it from the

connector (3).

Reverse this procedure to install the graphics board.

104 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 176 177

No comments

HP ZBook 17 Mobile Workstation (ENERGY STAR) User Manual Page 116