HP 425 Specifications download pdf (Page 97)

5. Lift the display assembly (3) from the base enclosure.

Remove the display assembly:

If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the two

mylar screw covers (1) and the 2 Phillips PM2.5×4.0 screws (2) that secure the display bezel to

the display assembly. The screw covers for the 39.6-cm (15.6-in) computer are available in the

Rubber Kit, spare part number 608931-001, and for the 35.6-cm (14.0-in) or 33.8-cm (13.3-in)

computer are available in the Rubber Kit, spare part number 605789-001.

2. Starting at the top of the display, flex the bezel (1) and work around the periphery of the bezel

(2) and (3) to release the bezel from the display enclosure .

Component replacement procedures

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 164 165

No comments

HP 425 Specifications Page 97