HP 14 User's Guide download pdf (Page 70)

4. When prompted, type your current password.

5. When prompted, type your new password again to confirm.

6. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of

the screen, and then follow the on-screen instructions.

– or –

Use the arrow keys to select File > Save Changes and Exit, and then press enter.

Your changes go into effect when the computer restarts.

Deleting a BIOS administrator password

1. Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup

Menu” message is displayed at the bottom of the screen.

2. Press f10 to enter Computer Setup.

3. Use a pointing device or the arrow keys to select Security > Change Password, and then press

enter.

4. When prompted, type your current password.

5. When prompted for the new password, leave the field empty, and then press enter.

6. Read the warning. To continue, select YES.

7. When prompted to type your new password again, leave the field empty, and then press enter.

8. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of

the screen, and then follow the on-screen instructions.

– or –

Use the arrow keys to select File > Save Changes and Exit, and then press enter.

Your changes go into effect when the computer restarts.

Entering a BIOS administrator password

At the BIOS administrator password prompt, type your password (using the same kind of keys you

used to set the password), and then press enter. After 3 unsuccessful attempts to enter the BIOS

administrator password, you must restart the computer and try again.

Managing a Computer Setup DriveLock password

CAUTION: To prevent the DriveLock-protected hard drive from becoming permanently unusable,

record the DriveLock user password and the DriveLock master password in a safe place away from

your computer. If you forget both DriveLock passwords, the hard drive will be permanently locked and

can no longer be used.

DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be

applied only to the internal hard drive(s) of the computer. After DriveLock protection is applied to a

drive, a password must be entered to access the drive. The drive must be inserted into the computer

or an advanced port replicator in order for it to be accessed by the DriveLock passwords.

NOTE: A BIOS Administrator password must be set before you can access the DriveLock features.

60 Chapter 9 Security

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 105 106

No comments

Models	Document Type
GAGM2432	Instruction Manual Foremost GAGM2432 Instructions / Assembly, 4 pages
GAWW1924	Installation Guide Foremost GAWW1924 Installation Guide, 4 pages
KOWA1934COMBO	Instruction Manual Foremost KOWA1934COMBO Instructions / Assembly, 10 pages
KOWS0824	Instruction Manual Foremost KOWS0824 Instructions / Assembly, 4 pages
NADGAT7222D	Instruction Manual Foremost NADGAT7222D Instructions / Assembly, 5 pages
NADGL2474	Instruction Manual Foremost NADGL2474 Instructions / Assembly, 4 pages
RACW1519	Instruction Manual Foremost RACW1519 Instructions / Assembly, 5 pages
RACWH2015	Installation Guide Foremost RACWH2015 Installation Guide, 5 pages
TENA3022	Instruction Manual Foremost TENA3022 Instructions / Assembly, 4 pages
TENA5822D	Instruction Manual Foremost TENA5822D Instructions / Assembly, 6 pages
TENW2528	Instruction Manual Foremost TENW2528 Instructions / Assembly, 4 pages
WWMB1222	Instruction Manual Foremost WWMB1222 Instructions / Assembly, 12 pages

HP 14 User's Guide Page 70