HP 14-3100eb SPECTRE Technical Information download pdf (Page 45)

Card Reader board cable

NOTE: The Card Reader board cable is included in the Cable Kit, spare part number 672006-001.

Before removing the Card Reader board cable, follow these steps:

1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect the power from the computer by unplugging the power cord from the computer.

3. Disconnect all external devices from the computer.

4. Remove the battery (see

Battery on page 33).

Remove the Card Reader board cable:

▲

Disconnect both ends of the Card Reader board cable (1) and (2) from the system board, and

then release the cable (3) from the clips and channel built into the base enclosure.

Reverse this procedure to install the Card Reader board cable.

Component replacement procedures

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 97 98

No comments

HP 14-3100eb SPECTRE Technical Information Page 45