HP 165st User's Guide download pdf (Page 60)

3-20

Converting 2.6-Gb-Drive Jukeboxes to 5.2-Gb-Drive Jukeboxes

Converting From Jukeboxes Using 2.6-Gbyte Drives to Jukeboxes

Using 5.2-GByte Drives

Figure 3-14 Removing Cables From a Drive

7. Use the drive cables from the kit and route the cables for the two drives into the

enclosure as shown in Figure 3-14.

8. Mount the cable clip on the rear of both drives as shown in #4 of Figure 3-14.

9. Slide the bottom drive into the enclosure far enough to connect a set of drive

cables to the drive as shown in #1, #2, and #3 on Figure 3-14.

As you connect the drive interface cable, slide the cable into the cable clip on the

rear of the drive.

10. Slide the top drive into the enclosure far enough to connect a set of drive cables

to the drive as shown in #1, #2, and #3 on Figure 3-14.

As you connect the drive interface cable, slide the cable into the cable clip on the

rear of the drive.

11. Insert the T-10 screws to mount the drives (see Figure 3-13).

Each drive uses four screws; two on each side.

12. Remount the top and bottom covers on the enclosure (see #1 and #2 on Figure

3-13)

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 85 86

No comments

HP 165st User's Guide Page 60