HP 165st User's Guide download pdf (Page 36)

2-20

Upgrading Drives and Capacity in 5.2-Gb Drive Jukeboxes

Upgrading Drives (C1154J/K/L, C1158J/K/L Kits)

IMPORTANT A label on the top of the interface assembly covers the holes that will be used by the

port connectors on the additional SCSI interface PCA.

Remove the label before installing the additional SCSI PCA. Make sure that the

holes are clear of adhesive residue

2. Add the SCSI interface PCA from the kit to the interface assembly as shown in

Figure 2-17.

a. Remove the six T-20 screws that mount the existing PCA.

b. Insert and tighten six standoffs where the screws were located.

c. Mount the second PCA on top of the standoffs with six T-15 screws (either

the ones just removed or the ones in the kit).

d. Add the jumper as shown in the inset on Figure 2-17.

Use the six standoffs and screws as shown. Apply the jumper as shown.

Figure 2-17 Adding a SCSI Interface PCA

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 85 86

No comments

HP 165st User's Guide Page 36