Hp ML100 User Manual download pdf (Page 46)

Installing an operating system

To stall an OS, download the SATA RAID driin ver and create a driver diskette with the software and

Installing a supported Microsoft® Windows® OS

conds to enable the system to recognize the controller. If the

inst ctions from the

HP website (http://www.hp.com/support).

1. Insert the OS CD and reboot the system.

2. When prompted, press the F6 key to install a third-party driver.

NOTE: Press F6 within 5 se

system fails to recognize the controller, restart this procedure.

3. Insert the SATA RAID driver diskette created earlier. The system prompts the next action.

e diskette. Then, press the Enter key. The OS searches the

emaining on-screen instructions to complete the installation.

Installing a supported Linux OS

To install a supported Linux OS when using the HP Embedded SATA RAID controller, see the OS

documentation.

4. Press the S key to specify the driver from th

diskette for a suitable driver.

5. After locating the Adaptec Embedded Serial ATA HostRAID driver, press Enter.

6. Follow the r

Software and configuration utilities 46

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 110 111

No comments

Hp ML100 User Manual Page 46